int/nucleo-f767-blinky/cube/nucleo-f767-blinky/Inc/stm32f7xx_hal_conf.h

   1 /**
   2   ******************************************************************************
   3   * @file    stm32f7xx_hal_conf.h
   4   * @brief   HAL configuration file.
   5   ******************************************************************************
   6   * @attention
   7   *
   8   * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
   9   *
  10   * Redistribution and use in source and binary forms, with or without modification,
  11   * are permitted provided that the following conditions are met:
  12   *   1. Redistributions of source code must retain the above copyright notice,
  13   *      this list of conditions and the following disclaimer.
  14   *   2. Redistributions in binary form must reproduce the above copyright notice,
  15   *      this list of conditions and the following disclaimer in the documentation
  16   *      and/or other materials provided with the distribution.
  17   *   3. Neither the name of STMicroelectronics nor the names of its contributors
  18   *      may be used to endorse or promote products derived from this software
  19   *      without specific prior written permission.
  20   *
  21   * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  22   * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  23   * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  24   * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
  25   * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  26   * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  27   * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  28   * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  29   * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  30   * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  31   *
  32   ******************************************************************************
  33   */
  34
  35 /* Define to prevent recursive inclusion -------------------------------------*/
  36 #ifndef __STM32F7xx_HAL_CONF_H
  37 #define __STM32F7xx_HAL_CONF_H
  38
  39 #ifdef __cplusplus
  40  extern "C" {
  41 #endif
  42
  43 #include "mxconstants.h"
  44
  45 /* Exported types ------------------------------------------------------------*/
  46 /* Exported constants --------------------------------------------------------*/
  47
  48 /* ########################## Module Selection ############################## */
  49 /**
  50   * @brief This is the list of modules to be used in the HAL driver
  51   */
  52 #define HAL_MODULE_ENABLED
  53
  54 /* #define HAL_ADC_MODULE_ENABLED   */
  55 /* #define HAL_CAN_MODULE_ENABLED   */
  56 /* #define HAL_CEC_MODULE_ENABLED   */
  57 /* #define HAL_CRC_MODULE_ENABLED   */
  58 /* #define HAL_CRYP_MODULE_ENABLED   */
  59 /* #define HAL_DAC_MODULE_ENABLED   */
  60 /* #define HAL_DCMI_MODULE_ENABLED   */
  61 /* #define HAL_DMA2D_MODULE_ENABLED   */
  62 /* #define HAL_ETH_MODULE_ENABLED   */
  63 /* #define HAL_NAND_MODULE_ENABLED   */
  64 /* #define HAL_NOR_MODULE_ENABLED   */
  65 /* #define HAL_SRAM_MODULE_ENABLED   */
  66 /* #define HAL_SDRAM_MODULE_ENABLED   */
  67 /* #define HAL_HASH_MODULE_ENABLED   */
  68 /* #define HAL_I2S_MODULE_ENABLED   */
  69 /* #define HAL_IWDG_MODULE_ENABLED   */
  70 /* #define HAL_LPTIM_MODULE_ENABLED   */
  71 /* #define HAL_LTDC_MODULE_ENABLED   */
  72 /* #define HAL_QSPI_MODULE_ENABLED   */
  73 /* #define HAL_RNG_MODULE_ENABLED   */
  74 /* #define HAL_RTC_MODULE_ENABLED   */
  75 /* #define HAL_SAI_MODULE_ENABLED   */
  76 /* #define HAL_SD_MODULE_ENABLED   */
  77 /* #define HAL_SPDIFRX_MODULE_ENABLED   */
  78 /* #define HAL_SPI_MODULE_ENABLED   */
  79 /* #define HAL_TIM_MODULE_ENABLED   */
  80 #define HAL_UART_MODULE_ENABLED
  81 /* #define HAL_USART_MODULE_ENABLED   */
  82 /* #define HAL_IRDA_MODULE_ENABLED   */
  83 /* #define HAL_SMARTCARD_MODULE_ENABLED   */
  84 /* #define HAL_WWDG_MODULE_ENABLED   */
  85 /* #define HAL_PCD_MODULE_ENABLED   */
  86 /* #define HAL_HCD_MODULE_ENABLED   */
  87 /* #define HAL_DFSDM_MODULE_ENABLED   */
  88 /* #define HAL_DSI_MODULE_ENABLED   */
  89 /* #define HAL_JPEG_MODULE_ENABLED   */
  90 /* #define HAL_MDIOS_MODULE_ENABLED   */
  91 #define HAL_GPIO_MODULE_ENABLED
  92 #define HAL_DMA_MODULE_ENABLED
  93 #define HAL_RCC_MODULE_ENABLED
  94 #define HAL_FLASH_MODULE_ENABLED
  95 #define HAL_PWR_MODULE_ENABLED
  96 #define HAL_I2C_MODULE_ENABLED
  97 #define HAL_CORTEX_MODULE_ENABLED
  98
  99 /* ########################## HSE/HSI Values adaptation ##################### */
 100 /**
 101   * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
 102   *        This value is used by the RCC HAL module to compute the system frequency
 103   *        (when HSE is used as system clock source, directly or through the PLL).
 104   */
 105 #if !defined  (HSE_VALUE)
 106   #define HSE_VALUE    ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */
 107 #endif /* HSE_VALUE */
 108
 109 #if !defined  (HSE_STARTUP_TIMEOUT)
 110   #define HSE_STARTUP_TIMEOUT    ((uint32_t)100U)   /*!< Time out for HSE start up, in ms */
 111 #endif /* HSE_STARTUP_TIMEOUT */
 112
 113 /**
 114   * @brief Internal High Speed oscillator (HSI) value.
 115   *        This value is used by the RCC HAL module to compute the system frequency
 116   *        (when HSI is used as system clock source, directly or through the PLL).
 117   */
 118 #if !defined  (HSI_VALUE)
 119   #define HSI_VALUE    ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
 120 #endif /* HSI_VALUE */
 121
 122 /**
 123   * @brief Internal Low Speed oscillator (LSI) value.
 124   */
 125 #if !defined  (LSI_VALUE)
 126  #define LSI_VALUE  ((uint32_t)40000U)       /*!< LSI Typical Value in Hz*/
 127 #endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
 128                                              The real value may vary depending on the variations
 129                                              in voltage and temperature.  */
 130 /**
 131   * @brief External Low Speed oscillator (LSE) value.
 132   */
 133 #if !defined  (LSE_VALUE)
 134  #define LSE_VALUE  ((uint32_t)32768U)    /*!< Value of the External Low Speed oscillator in Hz */
 135 #endif /* LSE_VALUE */
 136
 137 #if !defined  (LSE_STARTUP_TIMEOUT)
 138   #define LSE_STARTUP_TIMEOUT    ((uint32_t)5000U)   /*!< Time out for LSE start up, in ms */
 139 #endif /* LSE_STARTUP_TIMEOUT */
 140
 141 /**
 142   * @brief External clock source for I2S peripheral
 143   *        This value is used by the I2S HAL module to compute the I2S clock source
 144   *        frequency, this source is inserted directly through I2S_CKIN pad.
 145   */
 146 #if !defined  (EXTERNAL_CLOCK_VALUE)
 147   #define EXTERNAL_CLOCK_VALUE    ((uint32_t)12288000U) /*!< Value of the Internal oscillator in Hz*/
 148 #endif /* EXTERNAL_CLOCK_VALUE */
 149
 150 /* Tip: To avoid modifying this file each time you need to use different HSE,
 151    ===  you can define the HSE value in your toolchain compiler preprocessor. */
 152
 153 /* ########################### System Configuration ######################### */
 154 /**
 155   * @brief This is the HAL system configuration section
 156   */
 157 #define  VDD_VALUE                    ((uint32_t)3300U) /*!< Value of VDD in mv */
 158 #define  TICK_INT_PRIORITY            ((uint32_t)0U) /*!< tick interrupt priority */
 159 #define  USE_RTOS                     0U
 160 #define  PREFETCH_ENABLE              1U
 161 #define  ART_ACCLERATOR_ENABLE        1U /* To enable instruction cache and prefetch */
 162
 163 /* ########################## Assert Selection ############################## */
 164 /**
 165   * @brief Uncomment the line below to expanse the "assert_param" macro in the
 166   *        HAL drivers code
 167   */
 168 /* #define USE_FULL_ASSERT    1 */
 169
 170 /* ################## Ethernet peripheral configuration ##################### */
 171
 172 /* Section 1 : Ethernet peripheral configuration */
 173
 174 /* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
 175 #define MAC_ADDR0   2U
 176 #define MAC_ADDR1   0U
 177 #define MAC_ADDR2   0U
 178 #define MAC_ADDR3   0U
 179 #define MAC_ADDR4   0U
 180 #define MAC_ADDR5   0U
 181
 182 /* Definition of the Ethernet driver buffers size and count */
 183 #define ETH_RX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for receive               */
 184 #define ETH_TX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for transmit              */
 185 #define ETH_RXBUFNB                    ((uint32_t)4U)       /* 4 Rx buffers of size ETH_RX_BUF_SIZE  */
 186 #define ETH_TXBUFNB                    ((uint32_t)4U)       /* 4 Tx buffers of size ETH_TX_BUF_SIZE  */
 187
 188 /* Section 2: PHY configuration section */
 189
 190 /* DP83848_PHY_ADDRESS Address*/
 191 #define DP83848_PHY_ADDRESS           0x01U
 192 /* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
 193 #define PHY_RESET_DELAY                 ((uint32_t)0x000000FFU)
 194 /* PHY Configuration delay */
 195 #define PHY_CONFIG_DELAY                ((uint32_t)0x00000FFFU)
 196
 197 #define PHY_READ_TO                     ((uint32_t)0x0000FFFFU)
 198 #define PHY_WRITE_TO                    ((uint32_t)0x0000FFFFU)
 199
 200 /* Section 3: Common PHY Registers */
 201
 202 #define PHY_BCR                         ((uint16_t)0x00U)    /*!< Transceiver Basic Control Register   */
 203 #define PHY_BSR                         ((uint16_t)0x01U)    /*!< Transceiver Basic Status Register    */
 204
 205 #define PHY_RESET                       ((uint16_t)0x8000U)  /*!< PHY Reset */
 206 #define PHY_LOOPBACK                    ((uint16_t)0x4000U)  /*!< Select loop-back mode */
 207 #define PHY_FULLDUPLEX_100M             ((uint16_t)0x2100U)  /*!< Set the full-duplex mode at 100 Mb/s */
 208 #define PHY_HALFDUPLEX_100M             ((uint16_t)0x2000U)  /*!< Set the half-duplex mode at 100 Mb/s */
 209 #define PHY_FULLDUPLEX_10M              ((uint16_t)0x0100U)  /*!< Set the full-duplex mode at 10 Mb/s  */
 210 #define PHY_HALFDUPLEX_10M              ((uint16_t)0x0000U)  /*!< Set the half-duplex mode at 10 Mb/s  */
 211 #define PHY_AUTONEGOTIATION             ((uint16_t)0x1000U)  /*!< Enable auto-negotiation function     */
 212 #define PHY_RESTART_AUTONEGOTIATION     ((uint16_t)0x0200U)  /*!< Restart auto-negotiation function    */
 213 #define PHY_POWERDOWN                   ((uint16_t)0x0800U)  /*!< Select the power down mode           */
 214 #define PHY_ISOLATE                     ((uint16_t)0x0400U)  /*!< Isolate PHY from MII                 */
 215
 216 #define PHY_AUTONEGO_COMPLETE           ((uint16_t)0x0020U)  /*!< Auto-Negotiation process completed   */
 217 #define PHY_LINKED_STATUS               ((uint16_t)0x0004U)  /*!< Valid link established               */
 218 #define PHY_JABBER_DETECTION            ((uint16_t)0x0002U)  /*!< Jabber condition detected            */
 219
 220 /* Section 4: Extended PHY Registers */
 221
 222 #define PHY_SR                          ((uint16_t)0x10U)    /*!< PHY status register Offset                      */
 223 #define PHY_MICR                        ((uint16_t)0x11U)    /*!< MII Interrupt Control Register                  */
 224 #define PHY_MISR                        ((uint16_t)0x12U)    /*!< MII Interrupt Status and Misc. Control Register */
 225
 226 #define PHY_LINK_STATUS                 ((uint16_t)0x0001U)  /*!< PHY Link mask                                   */
 227 #define PHY_SPEED_STATUS                ((uint16_t)0x0002U)  /*!< PHY Speed mask                                  */
 228 #define PHY_DUPLEX_STATUS               ((uint16_t)0x0004U)  /*!< PHY Duplex mask                                 */
 229
 230 #define PHY_MICR_INT_EN                 ((uint16_t)0x0002U)  /*!< PHY Enable interrupts                           */
 231 #define PHY_MICR_INT_OE                 ((uint16_t)0x0001U)  /*!< PHY Enable output interrupt events              */
 232
 233 #define PHY_MISR_LINK_INT_EN            ((uint16_t)0x0020U)  /*!< Enable Interrupt on change of link status       */
 234 #define PHY_LINK_INTERRUPT              ((uint16_t)0x2000U)  /*!< PHY link status interrupt mask                  */
 235
 236 /* ################## SPI peripheral configuration ########################## */
 237
 238 /* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
 239 * Activated: CRC code is present inside driver
 240 * Deactivated: CRC code cleaned from driver
 241 */
 242
 243 #define USE_SPI_CRC                     0U
 244
 245 /* Includes ------------------------------------------------------------------*/
 246 /**
 247   * @brief Include module's header file
 248   */
 249
 250 #ifdef HAL_RCC_MODULE_ENABLED
 251   #include "stm32f7xx_hal_rcc.h"
 252 #endif /* HAL_RCC_MODULE_ENABLED */
 253
 254 #ifdef HAL_GPIO_MODULE_ENABLED
 255   #include "stm32f7xx_hal_gpio.h"
 256 #endif /* HAL_GPIO_MODULE_ENABLED */
 257
 258 #ifdef HAL_DMA_MODULE_ENABLED
 259   #include "stm32f7xx_hal_dma.h"
 260 #endif /* HAL_DMA_MODULE_ENABLED */
 261
 262 #ifdef HAL_CORTEX_MODULE_ENABLED
 263   #include "stm32f7xx_hal_cortex.h"
 264 #endif /* HAL_CORTEX_MODULE_ENABLED */
 265
 266 #ifdef HAL_ADC_MODULE_ENABLED
 267   #include "stm32f7xx_hal_adc.h"
 268 #endif /* HAL_ADC_MODULE_ENABLED */
 269
 270 #ifdef HAL_CAN_MODULE_ENABLED
 271   #include "stm32f7xx_hal_can.h"
 272 #endif /* HAL_CAN_MODULE_ENABLED */
 273
 274 #ifdef HAL_CEC_MODULE_ENABLED
 275   #include "stm32f7xx_hal_cec.h"
 276 #endif /* HAL_CEC_MODULE_ENABLED */
 277
 278 #ifdef HAL_CRC_MODULE_ENABLED
 279   #include "stm32f7xx_hal_crc.h"
 280 #endif /* HAL_CRC_MODULE_ENABLED */
 281
 282 #ifdef HAL_CRYP_MODULE_ENABLED
 283   #include "stm32f7xx_hal_cryp.h"
 284 #endif /* HAL_CRYP_MODULE_ENABLED */
 285
 286 #ifdef HAL_DMA2D_MODULE_ENABLED
 287   #include "stm32f7xx_hal_dma2d.h"
 288 #endif /* HAL_DMA2D_MODULE_ENABLED */
 289
 290 #ifdef HAL_DAC_MODULE_ENABLED
 291   #include "stm32f7xx_hal_dac.h"
 292 #endif /* HAL_DAC_MODULE_ENABLED */
 293
 294 #ifdef HAL_DCMI_MODULE_ENABLED
 295   #include "stm32f7xx_hal_dcmi.h"
 296 #endif /* HAL_DCMI_MODULE_ENABLED */
 297
 298 #ifdef HAL_ETH_MODULE_ENABLED
 299   #include "stm32f7xx_hal_eth.h"
 300 #endif /* HAL_ETH_MODULE_ENABLED */
 301
 302 #ifdef HAL_FLASH_MODULE_ENABLED
 303   #include "stm32f7xx_hal_flash.h"
 304 #endif /* HAL_FLASH_MODULE_ENABLED */
 305
 306 #ifdef HAL_SRAM_MODULE_ENABLED
 307   #include "stm32f7xx_hal_sram.h"
 308 #endif /* HAL_SRAM_MODULE_ENABLED */
 309
 310 #ifdef HAL_NOR_MODULE_ENABLED
 311   #include "stm32f7xx_hal_nor.h"
 312 #endif /* HAL_NOR_MODULE_ENABLED */
 313
 314 #ifdef HAL_NAND_MODULE_ENABLED
 315   #include "stm32f7xx_hal_nand.h"
 316 #endif /* HAL_NAND_MODULE_ENABLED */
 317
 318 #ifdef HAL_SDRAM_MODULE_ENABLED
 319   #include "stm32f7xx_hal_sdram.h"
 320 #endif /* HAL_SDRAM_MODULE_ENABLED */
 321
 322 #ifdef HAL_HASH_MODULE_ENABLED
 323  #include "stm32f7xx_hal_hash.h"
 324 #endif /* HAL_HASH_MODULE_ENABLED */
 325
 326 #ifdef HAL_I2C_MODULE_ENABLED
 327  #include "stm32f7xx_hal_i2c.h"
 328 #endif /* HAL_I2C_MODULE_ENABLED */
 329
 330 #ifdef HAL_I2S_MODULE_ENABLED
 331  #include "stm32f7xx_hal_i2s.h"
 332 #endif /* HAL_I2S_MODULE_ENABLED */
 333
 334 #ifdef HAL_IWDG_MODULE_ENABLED
 335  #include "stm32f7xx_hal_iwdg.h"
 336 #endif /* HAL_IWDG_MODULE_ENABLED */
 337
 338 #ifdef HAL_LPTIM_MODULE_ENABLED
 339  #include "stm32f7xx_hal_lptim.h"
 340 #endif /* HAL_LPTIM_MODULE_ENABLED */
 341
 342 #ifdef HAL_LTDC_MODULE_ENABLED
 343  #include "stm32f7xx_hal_ltdc.h"
 344 #endif /* HAL_LTDC_MODULE_ENABLED */
 345
 346 #ifdef HAL_PWR_MODULE_ENABLED
 347  #include "stm32f7xx_hal_pwr.h"
 348 #endif /* HAL_PWR_MODULE_ENABLED */
 349
 350 #ifdef HAL_QSPI_MODULE_ENABLED
 351  #include "stm32f7xx_hal_qspi.h"
 352 #endif /* HAL_QSPI_MODULE_ENABLED */
 353
 354 #ifdef HAL_RNG_MODULE_ENABLED
 355  #include "stm32f7xx_hal_rng.h"
 356 #endif /* HAL_RNG_MODULE_ENABLED */
 357
 358 #ifdef HAL_RTC_MODULE_ENABLED
 359  #include "stm32f7xx_hal_rtc.h"
 360 #endif /* HAL_RTC_MODULE_ENABLED */
 361
 362 #ifdef HAL_SAI_MODULE_ENABLED
 363  #include "stm32f7xx_hal_sai.h"
 364 #endif /* HAL_SAI_MODULE_ENABLED */
 365
 366 #ifdef HAL_SD_MODULE_ENABLED
 367  #include "stm32f7xx_hal_sd.h"
 368 #endif /* HAL_SD_MODULE_ENABLED */
 369
 370 #ifdef HAL_SPDIFRX_MODULE_ENABLED
 371  #include "stm32f7xx_hal_spdifrx.h"
 372 #endif /* HAL_SPDIFRX_MODULE_ENABLED */
 373
 374 #ifdef HAL_SPI_MODULE_ENABLED
 375  #include "stm32f7xx_hal_spi.h"
 376 #endif /* HAL_SPI_MODULE_ENABLED */
 377
 378 #ifdef HAL_TIM_MODULE_ENABLED
 379  #include "stm32f7xx_hal_tim.h"
 380 #endif /* HAL_TIM_MODULE_ENABLED */
 381
 382 #ifdef HAL_UART_MODULE_ENABLED
 383  #include "stm32f7xx_hal_uart.h"
 384 #endif /* HAL_UART_MODULE_ENABLED */
 385
 386 #ifdef HAL_USART_MODULE_ENABLED
 387  #include "stm32f7xx_hal_usart.h"
 388 #endif /* HAL_USART_MODULE_ENABLED */
 389
 390 #ifdef HAL_IRDA_MODULE_ENABLED
 391  #include "stm32f7xx_hal_irda.h"
 392 #endif /* HAL_IRDA_MODULE_ENABLED */
 393
 394 #ifdef HAL_SMARTCARD_MODULE_ENABLED
 395  #include "stm32f7xx_hal_smartcard.h"
 396 #endif /* HAL_SMARTCARD_MODULE_ENABLED */
 397
 398 #ifdef HAL_WWDG_MODULE_ENABLED
 399  #include "stm32f7xx_hal_wwdg.h"
 400 #endif /* HAL_WWDG_MODULE_ENABLED */
 401
 402 #ifdef HAL_PCD_MODULE_ENABLED
 403  #include "stm32f7xx_hal_pcd.h"
 404 #endif /* HAL_PCD_MODULE_ENABLED */
 405
 406 #ifdef HAL_HCD_MODULE_ENABLED
 407  #include "stm32f7xx_hal_hcd.h"
 408 #endif /* HAL_HCD_MODULE_ENABLED */
 409
 410 #ifdef HAL_DFSDM_MODULE_ENABLED
 411  #include "stm32f7xx_hal_dfsdm.h"
 412 #endif /* HAL_DFSDM_MODULE_ENABLED */
 413
 414 #ifdef HAL_DSI_MODULE_ENABLED
 415  #include "stm32f7xx_hal_dsi.h"
 416 #endif /* HAL_DSI_MODULE_ENABLED */
 417
 418 #ifdef HAL_JPEG_MODULE_ENABLED
 419  #include "stm32f7xx_hal_jpeg.h"
 420 #endif /* HAL_JPEG_MODULE_ENABLED */
 421
 422 #ifdef HAL_MDIOS_MODULE_ENABLED
 423  #include "stm32f7xx_hal_mdios.h"
 424 #endif /* HAL_MDIOS_MODULE_ENABLED */
 425 /* Exported macro ------------------------------------------------------------*/
 426 #ifdef  USE_FULL_ASSERT
 427 /**
 428   * @brief  The assert_param macro is used for function's parameters check.
 429   * @param  expr: If expr is false, it calls assert_failed function
 430   *         which reports the name of the source file and the source
 431   *         line number of the call that failed.
 432   *         If expr is true, it returns no value.
 433   * @retval None
 434   */
 435   #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
 436 /* Exported functions ------------------------------------------------------- */
 437   void assert_failed(uint8_t* file, uint32_t line);
 438 #else
 439   #define assert_param(expr) ((void)0)
 440 #endif /* USE_FULL_ASSERT */
 441
 442 #ifdef __cplusplus
 443 }
 444 #endif
 445
 446 #endif /* __STM32F7xx_HAL_CONF_H */
 447
 448
 449 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/