[phd-thesis.git] / top / lang.tex

\documentclass[../thesis.tex]{subfiles}

\input{subfilepreamble}

\begin{document}
\input{subfileprefix}

\chapter{The \texorpdfstring{\gls{MTASK}}{mTask} language}%\texorpdfstring{\glsxtrshort{DSL}}{DSL}}%
\label{chp:mtask_dsl}
\begin{chapterabstract}
        \noindent This chapter introduces the \gls{TOP} language \gls{MTASK} language by:
        \begin{itemize}
                \item introducing the setup of the \gls{EDSL};
                \item and showing the language interface and examples for the type system, data types, expressions, tasks and their combinators.
        \end{itemize}
\end{chapterabstract}

The \gls{MTASK} system is a complete \gls{TOP} programming environment for programming microcontrollers.
This means that it not only contains a \gls{TOP} language but also a \gls{TOP} engine.
It is implemented as an \gls{EDSL} in \gls{CLEAN} using class-based---or tagless-final---embedding (see \cref{sec:tagless-final_embedding}).
Due to the nature of the embedding technique, it is possible to have multiple interpretations for programs written in the \gls{MTASK} language.
Not all of these intepretations are necessarily \gls{TOP} engines, some may perform an analysis over the program or typeset the program so that the output can be shown after evaluating the expression at run time.
The following interpretations are available for \gls{MTASK}.

\begin{description}
        \item[Printer]

                This interpretation converts the expression to a string representation.
                As the host language \gls{CLEAN} constructs the \gls{MTASK} expressions at run time, it can be useful to show the constructed expression.
        \item[Simulator]

                The simulator converts the expression to a ready-for-work \gls{ITASK} simulation in which the user can inspect and control the simulated peripherals and see the internal state of the tasks.
        \item[Byte code compiler]

                The compiler compiles the \gls{MTASK} program to a specialised byte code.
                Using a handful of integration functions and tasks (see \cref{chp:integration_with_itask}), \gls{MTASK} tasks can be executed on microcontrollers and integrated in \gls{ITASK} as if they were regular \gls{ITASK} tasks.
                Furthermore, with special language constructs, \glspl{SDS} can be shared between \gls{MTASK} and \gls{ITASK} programs.
\end{description}

When using the byte code compiler interpretation in conjunction with the \gls{ITASK} integration, \gls{MTASK} is a heterogeneous \gls{DSL}.
I.e.\ some components---e.g.\ the \gls{RTS} on the microcontroller---is largely unaware of the other components in the system, and it is executed on a completely different architecture.
The \gls{MTASK} language is an enriched simply-typed $\lambda$-calculus with support for some basic types, arithmetic operations, and function definition; and a task language (see \cref{sec:top}).

\section{Types}
To leverage the type checker of the host language, types in the \gls{MTASK} language are expressed as types in the host language, to make the language type safe.
However, not all types in the host language are suitable for microcontrollers that may only have \qty{2}{\kibi\byte} of \gls{RAM} so class constraints are therefore added to the \gls{DSL} functions.
The most used class constraint is the \cleaninline{type} class collection containing functions for serialization, printing, \gls{ITASK} constraints, \etc.
Many of these functions can be derived using generic programming.
An even stronger restriction on types is defined for types that have a stack representation.
This \cleaninline{basicType} class has instances for many \gls{CLEAN} basic types such as \cleaninline{Int}, \cleaninline{Real} and \cleaninline{Bool}.
The class constraints for values in \gls{MTASK} are omnipresent in all functions and therefore often omitted throughout throughout the chapters for brevity and clarity.

\begin{table}[ht]
        \centering
        \caption{Translation from \gls{CLEAN}/\gls{MTASK} data types to \gls{CPP} datatypes.}%
        \label{tbl:mtask-c-datatypes}
        \begin{tabular}{lll}
                \toprule
                \gls{CLEAN}/\gls{MTASK} & \gls{CPP} type & \textnumero{}bits\\
                \midrule
                \cleaninline{Bool}             & \cinline{bool}    & 16\\
                \cleaninline{Char}             & \cinline{char}    & 16\\
                \cleaninline{Int}              & \cinline{int16_t} & 16\\
                \cleaninline{Real}             & \cinline{float}   & 32\\
                \cleaninline{:: Long}          & \cinline{int32_t} & 32\\
                \cleaninline{:: T = A \| B \| C} & \cinline{enum}    & 16\\
                \bottomrule
        \end{tabular}
\end{table}

\Cref{lst:constraints} contains the definitions for the auxiliary types and type constraints (such as \cleaninline{type} and \cleaninline{basicType}) that are used to construct \gls{MTASK} expressions.
The \gls{MTASK} language interface consists of a core collection of type classes bundled in the type class \cleaninline{class mtask}.
Every interpretation implements the type classes in the \cleaninline{mtask} class
There are also \gls{MTASK} extensions that not every interpretation implements such as peripherals and \gls{ITASK} integration.
\begin{lstClean}[caption={Classes and class collections for the \gls{MTASK} language.},label={lst:constraints}]
class type t | iTask, ... ,fromByteCode, toByteCode t
class basicType t | type t where ...

class mtask v | expr, ..., int, real, long v
\end{lstClean}

Sensors, \glspl{SDS}, functions, \etc{} may only be defined at the top level.
The \cleaninline{Main} type is used that is used to distinguish the top level from the main expression.
Some top level definitions, such as functions, are defined using \gls{HOAS}.
To make their syntax friendlier, the \cleaninline{In} type---an infix tuple---is used to combine these top level definitions as can be seen in \cleaninline{someTask} (\cref{lst:mtask_types}).

\begin{lstClean}[caption={Example task and auxiliary types in the \gls{MTASK} language.},label={lst:mtask_types}]
:: Main a = { main :: a }
:: In a b = (In) infix 0 a b

someTask :: MTask v Int | mtask v & liftsds v & sensor1 v & ...
someTask =
        sensor1 config1 \sns1->
        sensor2 config2 \sns2->
           sds     \s1  = initialValue
        In liftsds \s2  = someiTaskSDS
        In fun     \fun1= ( ... )
        In fun     \fun2= ( ... )
        In { main = mainexpr }
\end{lstClean}

\Gls{MTASK} expressions are usually overloaded in their interpretation (\cleaninline{v}).
In \gls{CLEAN}, all free variables in a type are implicitly universally quantified.
In order to use the \gls{MTASK} expressions with multiple interpretations, rank-2 polymorphism is required \citep{odersky_putting_1996}\citep[\citesection{3.7.4}]{plasmeijer_clean_2021}.
\Cref{lst:rank2_mtask} shows an example of a function that simulates an \gls{MTASK} expression while showing the pretty printed representation in parallel.
Providing a type for the \cleaninline{simulateAndPrint} function is mandatory as the compiler cannot infer the type of rank-2 polymorphic functions.

\begin{lstClean}[label={lst:rank2_mtask},caption={Rank-2 polymorphism to allow multiple interpretations}]
prettyPrint :: Main (MTask PrettyPrint a) -> String
simulate :: Main (MTask Simulate a) -> Task a

simulateAndPrint :: (A.v: Main (MTask v a) | mtask v) -> Task a | type a
simulateAndPrint mt =
            simulate mt
        -|| Hint "Current task:" @>> viewInformation [] (prettyPrint mt)
\end{lstClean}

\section{Expressions}\label{sec:expressions}
This section shows all \gls{MTASK} constructs for exppressions.
\Cref{lst:expressions} shows the \cleaninline{expr} class containing the functionality to lift values from the host language to the \gls{MTASK} language (\cleaninline{lit}); perform number and boolean arithmetics; do comparisons; and conditional execution.
For every common boolean and arithmetic operator in the host language, an \gls{MTASK} variant is present, suffixed by a period to not clash with \gls{CLEAN}'s builtin operators.

\begin{lstClean}[caption={The \gls{MTASK} class for expressions},label={lst:expressions}]
class expr v where
        lit :: t -> v t | type t
        (+.) infixl 6 :: (v t) (v t) -> v t | basicType, +, zero t
        ...
        (&.) infixr 3 :: (v Bool) (v Bool) -> v Bool
        (|.) infixr 2 :: (v Bool) (v Bool) -> v Bool
        Not           :: (v Bool) -> v Bool
        (==.) infix 4 :: (v a) (v a) -> v Bool | Eq, basicType a
        ...
        If :: (v Bool) (v t) (v t) -> v t | type t
\end{lstClean}

Conversion to-and-fro data types is available through the overloaded functions \cleaninline{int}, \cleaninline{long} and \cleaninline{real} that will convert the argument to the respective type similar to casting in \gls{C}.
For most interpretations, there are instances of these classes for all numeric types.

\begin{lstClean}[caption={Type conversion functions in \gls{MTASK}.}]
class int  v a :: (v a) -> v Int
class real v a :: (v a) -> v Real
class long v a :: (v a) -> v Long
\end{lstClean}

Values from the host language must be explicitly lifted to the \gls{MTASK} language using the \cleaninline{lit} function.
For convenience, there are many lower-cased macro definitions for often used constants such as \cleaninline{true :== lit True}, \cleaninline{false :== lit False}, \etc.

\Cref{lst:example_exprs} shows some examples of these expressions.
Since they are only expressions, there is no need for a \cleaninline{Main}.
\cleaninline{e0} defines the literal $42$, \cleaninline{e1} calculates the literal $42.0$ using real numbers.
\cleaninline{e2} compares \cleaninline{e0} and \cleaninline{e1} as integers and if they are equal it returns the \cleaninline{e2}$/2$ and \cleaninline{e0} otherwise.

\begin{lstClean}[label={lst:example_exprs},caption={Example \gls{MTASK} expressions.}]
e0 :: v Int | expr v
e0 = lit 42

e1 :: v Real | expr v
e1 = lit 38.0 + real (lit 4)

e2 :: v Int | expr v
e2 = if' (e0 ==. int e1)
        (int e1 /. lit 2) e0
\end{lstClean}

\Gls{MTASK} is shallowly embedded in \gls{CLEAN} and the terms are constructed at runtime.
This means that \gls{MTASK} programs can also be tailor-made at runtime or constructed using \gls{CLEAN} functions maximising the linguistic reuse \citep{krishnamurthi_linguistic_2001}
\cleaninline{approxEqual} in \cref{lst:example_macro} performs a simple approximate equality---albeit without taking into account all floating point pecularities.
When calling \cleaninline{approxEqual} in an \gls{MTASK} function, the resulting code is inlined.

\begin{lstClean}[label={lst:example_macro},caption={Example linguistic reuse in the \gls{MTASK} language.}]
approxEqual :: (v Real) (v Real) (v Real) -> v Real | expr v
approxEqual x y eps = if' (x ==. y) true
        ( if' (x >. y)
                (y -. x < eps)
                (x -. y < eps)
        )
\end{lstClean}

\subsection{Data types}
Most of \gls{CLEAN}'s fixed-size basic types are mapped on \gls{MTASK} types.
However, it can be useful to have access to compound types as well.
All types in \gls{MTASK} must have a fixed size representation on the stack so sum types are not (yet) supported.
While it is possible to lift types using the \cleaninline{lit} function, you cannot do anything with the types besides passing them around but they are being produced by some parallel task combinators (see \cref{sssec:combinators_parallel}).
To be able to use types as first class citizens, constructors and field selectors are required (see \cref{chp:first-class_datatypes}).
\Cref{lst:tuple_exprs} shows the scaffolding for supporting tuples in \gls{MTASK}.
Besides the constructors and field selectors, there is also a helper function available that transforms a function from a tuple of \gls{MTASK} expressions to an \gls{MTASK} expression of a tuple.
Examples for using tuple can be found in \cref{sec:mtask_functions}.

\begin{lstClean}[label={lst:tuple_exprs},caption={Tuple constructor and field selectors in \gls{MTASK}.}]
class tupl v where
        tupl :: (v a) (v b) -> v (a, b) | type a & type b
        first :: (v (a, b)) -> v a | type a & type b
        second :: (v (a, b)) -> v b | type a & type b

        tupopen f :== \v->f (first v, second v)
\end{lstClean}

\subsection{Functions}\label{sec:mtask_functions}
Adding functions to the language is achieved by type class to the \gls{DSL}.
By using \gls{HOAS}, both the function definition and the calls to the function can be controlled by the \gls{DSL} \citep{pfenning_higher-order_1988,chlipala_parametric_2008}.
The \gls{MTASK} only allows first-order functions and does not allow partial function application.
This is restricted by using a multi-parameter type class where the first parameter represents the arguments and the second parameter the view.
By providing a single instance per function arity instead of providing one instance for all functions and using tuples for the arguments this constraint can be enforced.
Also, \gls{MTASK} only supports top-level functions which is enforced by the \cleaninline{Main} box.
The definition of the type class and the instances for an example interpretation (\cleaninline{:: Inter}) are as follows:

\begin{lstClean}[caption={Functions in \gls{MTASK}.}]
class fun a v :: ((a -> v s) -> In (a -> v s) (Main (MTask v u)))
        -> Main (MTask v u)

instance fun () Inter where ...
instance fun (Inter a) Inter | type a where ...
instance fun (Inter a, Inter b) Inter | type a, type b where ...
instance fun (Inter a, Inter b, Inter c) Inter | type a, ... where ...
...
\end{lstClean}

Deriving how to define and use functions from the type is quite the challenge even though the resulting syntax is made easier using the infix type \cleaninline{In}.
\Cref{lst:function_examples} show the factorial function, a tail-call optimised factorial function and a function with zero arguments to demonstrate the syntax.
Splitting out the function definition for each single arity means that that for every function arity and combination of arguments, a separate class constraint must be created.
Many of the often used functions are already bundled in the \cleaninline{mtask} class constraint collection.
\cleaninline{factorialtail} shows a manually added class constraint.
Definiting zero arity functions is shown in the \cleaninline{zeroarity} expression.
Finally, \cleaninline{swapTuple} shows an example of a tuple being swapped.

% VimTeX: SynIgnore on
\begin{lstClean}[label={lst:function_examples},caption={Function examples in \gls{MTASK}.}]
factorial :: Main (v Int) | mtask v
factorial =
        fun \fac=(\i->if' (i <. lit 1)
                (lit 1)
                (i *. fac (i -. lit 1)))
        In {main = fac (lit 5) }

factorialtail :: Main (v Int) | mtask v & fun (v Int, v Int) v
factorialtail =
           fun \facacc=(\(acc, i)->if' (i <. lit 1)
                        acc
                        (fac (acc *. i, i -. lit 1)))
        In fun \fac=(\i->facacc (lit 1, i))
        In {main = fac (lit 5) }

zeroarity :: Main (v Int) | mtask v
zeroarity =
           fun \fourtytwo=(\()->lit 42)
        In fun \add=(\(x, y)->x +. y)
        In {main = add (fourtytwo (), lit 9)}

swapTuple :: Main (v (Int, Bool)) | mtask v
swapTuple =
           fun \swap=(tupopen \(x, y)->tupl y x)
        In {main = swap (tupl true (lit 42)) }
\end{lstClean}
% VimTeX: SynIgnore off

\section{Tasks and task combinators}\label{sec:top}
This section describes \gls{MTASK}'s task language.
\Gls{MTASK}'s task language can be divided into three categories, namely
\begin{enumerate*}
        \item Basic tasks, in most \gls{TOP} systems, the basic tasks are called editors, modelling the interactivity with the user.
                In \gls{MTASK}, there are no \emph{editors} in that sense but there is interaction with the outside world through microcontroller peripherals such as sensors and actuators.
        \item Task combinators provide a way of describing the workflow.
                They combine one or more tasks into a compound task.
        \item \glspl{SDS} in \gls{MTASK} can be seen as references to data that can be shared using many-to-many communication and are only accessible from within the task language to ensure atomicity.
\end{enumerate*}

As \gls{MTASK} is integrated with \gls{ITASK}, the same stability distinction is made for task values.
A task in \gls{MTASK} is denoted by the \gls{DSL} type synonym shown in \cref{lst:task_type}, an expression of the type \cleaninline{TaskValue a} in interpretation \cleaninline{v}.

\begin{lstClean}[label={lst:task_type},caption={Task type in \gls{MTASK}.}]
:: MTask v a :== v (TaskValue a)

// From the iTask library
:: TaskValue a
        = NoValue
        | Value a Bool
\end{lstClean}

\subsection{Basic tasks}
The most rudimentary basic tasks are the \cleaninline{rtrn} and \cleaninline{unstable} tasks.
They lift the value from the \gls{MTASK} expression language to the task domain either as a stable value or an unstable value.
There is also a special type of basic task for delaying execution.
The \cleaninline{delay} task---given a number of milliseconds---yields an unstable value while the time has not passed.
Once the specified time has passed, the time it overshot the planned time is yielded as a stable task value.
See \cref{sec:repeat} for an example task using \cleaninline{delay}.

\begin{lstClean}[label={lst:basic_tasks},caption={Function examples in \gls{MTASK}.}]
class rtrn v :: (v t) -> MTask v t
class unstable v :: (v t) -> MTask v t
class delay v :: (v n) -> MTask v n | long v n
\end{lstClean}

\subsubsection{Peripherals}\label{sssec:peripherals}
For every sensor or actuator, basic tasks are available that allow interaction with the specific peripheral.
The type classes for these tasks are not included in the \cleaninline{mtask} class collection as not all devices nor all language interpretations have such peripherals connected.

\Cref{lst:dht,lst:gpio} show the type classes for \glspl{DHT} sensors and \gls{GPIO} access.
Other peripherals have similar interfaces, they are available in the \cref{sec:aux_peripherals}.
For the \gls{DHT} sensor there are two basic tasks, \cleaninline{temperature} and \cleaninline{humidity}, that---will given a \cleaninline{DHT} object---produce a task that yields the observed temperature in \unit{\celcius} or relative humidity as a percentage as an unstable value.
Currently, two different types of \gls{DHT} sensors are supported, the \emph{DHT} family of sensors connect through $1$-wire protocol and the \emph{SHT} family of sensors connected using \gls{I2C} protocol.
Creating such a \cleaninline{DHT} object is very similar to creating functions in \gls{MTASK} and uses \gls{HOAS} to make it type safe.

\begin{lstClean}[label={lst:dht},caption={The \gls{MTASK} interface for \glspl{DHT} sensors.}]
:: DHT //abstract
:: DHTInfo
        = DHT_DHT Pin DHTtype
        | DHT_SHT I2CAddr
:: DHTtype = DHT11 | DHT21 | DHT22
class dht v where
        DHT :: DHTInfo ((v DHT) -> Main (v b)) -> Main (v b) | type b
        temperature :: (v DHT) -> MTask v Real
        humidity :: (v DHT) -> MTask v Real

measureTemp :: Main (MTask v Real) | mtask v & dht v
measureTemp = DHT (DHT_SHT (i2c 0x36)) \dht->
        {main=temperature dht}
\end{lstClean}

\Gls{GPIO} access is divided into three classes: analog, digital and pin modes (see \cref{lst:gpio}).
For all pins and pin modes an \gls{ADT} is available that enumerates the pins.
The analog \gls{GPIO} pins of a microcontroller are connected to an \gls{ADC} that translates the voltage to an integer.
Analog \gls{GPIO} pins can be either read or written to.
Digital \gls{GPIO} pins only report a high or a low value.
The \cleaninline{pin} type class allows functions to be overloaded in either the analog or digital pins, e.g.\ analog pins can be considered as digital pins as well.

For digital \gls{GPIO} interaction, the \cleaninline{dio} type class is used.
The first argument of the functions in this class is overloaded, i.e.\ it accepts either an \cleaninline{APin} or a \cleaninline{DPin}.
Analog \gls{GPIO} tasks are bundled in the \cleaninline{aio} type class.
\Gls{GPIO} pins usually operate according to a certain pin mode that states whether the pin acts as an input pin, an input with an internal pull-up resistor or an output pin.
This setting can be applied using the \cleaninline{pinMode} class by hand or by using the \cleaninline{declarePin} \gls{GPIO} pin constructor.
Setting the pin mode is a task that immediately finisheds and fields a stable unit value.
Writing to a pin is also a task that immediately finishes but yields the written value instead.
Reading a pin is a task that yields an unstable value---i.e.\ the value read from the actual pin.

\begin{lstClean}[label={lst:gpio},caption={The \gls{MTASK} interface for \gls{GPIO} access.}]
:: APin = A0 | A1 | A2 | A3 | A4 | A5
:: DPin = D0 | D1 | D2 | D3 | D4 | D5 | D6 | D7 | D8 | D9 | D10 | ...
:: PinMode = PMInput | PMOutput | PMInputPullup
:: Pin = AnalogPin APin | DigitalPin DPin

class pin p :: p -> Pin
instance pin APin, DPin

class aio v where
        writeA :: (v APin) (v Int) -> MTask v Int
        readA :: (v APin) -> MTask v Int

class dio p v | pin p where
        writeD :: (v p) (v Bool) -> MTask v Bool
        readD :: (v p) -> MTask v Bool | pin p

class pinMode v where
        pinMode :: (v PinMode) (v p) -> MTask v () | pin p
        declarePin :: p PinMode ((v p) -> Main (v a)) -> Main (v a) | pin p
\end{lstClean}

\Cref{lst:gpio_examples} shows two examples of \gls{MTASK} tasks using \gls{GPIO} pins.
\cleaninline{task1} reads analog \gls{GPIO} pin 3.
This is a task that never terminates.
\cleaninline{task2} writes the \cleaninline{true} (\gls{ARDUINO} \arduinoinline{HIGH}) value to digital \gls{GPIO} pin 3.
This task finishes immediately after writing to the pin.

\begin{lstClean}[label={lst:gpio_examples},caption={\Gls{GPIO} example in \gls{MTASK}.}]
task1 :: MTask v Int | mtask v
task1 = declarePin A3 PMInput \a3->{main=readA a3}

task2 :: MTask v Int | mtask v
task2 = declarePin D3 PMOutput \d3->{main=writeD d3 true}
\end{lstClean}

\subsection{Task combinators}
Task combinators are used to combine multiple tasks to describe workflows.
There are three main types of task combinators, namely:
\begin{enumerate*}
        \item Sequential combinators that execute tasks one after the other, possibly using the result of the left hand side.
        \item Parallel combinators that execute tasks at the same time combining the result.
        \item Miscellaneous combinators that change the semantics of a task---e.g.\ repeat it or delay execution.
\end{enumerate*}

\subsubsection{Sequential}
Sequential task combination allows the right-hand side task to observe the left-hand side task value.
All seqential task combinators are expressed in the \cleaninline{expr} class and can be---and are by default---derived from the Swiss army knife step combinator \cleaninline{>>*.}.
This combinator has a single task on the left-hand side and a list of \emph{task continuations} on the right-hand side.
The list of task continuations is checked every rewrite step and if one of the predicates matches, the task continues with the result of this combination.
\cleaninline{>>=.} is a shorthand for the bind operation, if the left-hand side is stable, the right-hand side function is called to produce a new task.
\cleaninline{>>\|.} is a shorthand for the sequence operation, if the left-hand side is stable, it continues with the right-hand side task.
The \cleaninline{>>~.} and \cleaninline{>>..} combinators are variants of the ones above that ignore the stability and continue on an unstable value as well.

\begin{lstClean}[label={lst:mtask_sequential},caption={Sequential task combinators in \gls{MTASK}.}]
class step v | expr v where
        (>>*.) infixl 1 :: (MTask v t) [Step v t u] -> MTask v u
        (>>=.) infixl 0 :: (MTask v t) ((v t) -> MTask v u) -> MTask v u
        (>>|.) infixl 0 :: (MTask v t)          (MTask v u) -> MTask v u
        (>>~.) infixl 0 :: (MTask v t) ((v t) -> MTask v u) -> MTask v u
        (>>..) infixl 0 :: (MTask v t)          (MTask v u) -> MTask v u

:: Step v t u
        = IfValue    ((v t) -> v Bool) ((v t) -> MTask v u)
        | IfStable   ((v t) -> v Bool) ((v t) -> MTask v u)
        | IfUnstable ((v t) -> v Bool) ((v t) -> MTask v u)
        | Always                                (MTask v u)
\end{lstClean}

The following listing shows an example of a step in action.
The \cleaninline{readPinBin} function produces an \gls{MTASK} task that classifies the value of an analogue pin into four bins.
It also shows that the nature of embedding allows the host language to be used as a macro language.
Furthermore

\begin{lstClean}[label={lst:mtask_readpinbin},caption={Read an analog pin and bin the value in \gls{MTASK}.}]
readPinBin :: Int -> Main (MTask v Int) | mtask v
readPinBin lim = declarePin PMInput A2 \a2->
        { main = readA a2 >>*.
                [  IfValue (\x->x <. lim) (\_->rtrn (lit bin))
                \\ lim <-[64,128,192,256]
                &  bin <- [0..]]}
\end{lstClean}

\subsubsection{Parallel}\label{sssec:combinators_parallel}
The result of a parallel task combination is a compound that actually executes the tasks at the same time.
There are two types of parallel task combinators (see \cref{lst:mtask_parallel}).

\begin{lstClean}[label={lst:mtask_parallel},caption={Parallel task combinators in \gls{MTASK}.}]
class (.&&.) infixr 4 v :: (MTask v a) (MTask v b) -> MTask v (a, b)
class (.||.) infixr 3 v :: (MTask v a) (MTask v a) -> MTask v a
\end{lstClean}

The conjunction combinator (\cleaninline{.&&.}) combines the result by putting the values from both sides in a tuple.
The stability of the task depends on the stability of both children.
If both children are stable, the result is stable, otherwise the result is unstable.
The disjunction combinator (\cleaninline{.\|\|.}) combines the results by picking the leftmost, most stable task.
The semantics are most easily described using the \gls{CLEAN} functions shown in \cref{lst:semantics_con,lst:semantics_dis}.

\begin{figure}[ht]
        \centering
        \begin{subfigure}[t]{.5\textwidth}
                \begin{lstClean}[caption={Semantics of the\\conjunction combinator.},label={lst:semantics_con}]
con :: (TaskValue a) (TaskValue b)
        -> TaskValue (a, b)
con NoValue r = NoValue
con l NoValue = NoValue
con (Value l ls) (Value r rs)
        = Value (l, r) (ls && rs)

                \end{lstClean}
        \end{subfigure}%
        \begin{subfigure}[t]{.5\textwidth}
                \begin{lstClean}[caption={Semantics of the\\disjunction combinator.},label={lst:semantics_dis}]
dis :: (TaskValue a) (TaskValue a)
        -> TaskValue a
dis NoValue r = r
dis l NoValue = l
dis (Value l ls) (Value r rs)
        | rs        = Value r True
        | otherwise = Value l ls
                \end{lstClean}
        \end{subfigure}
\end{figure}

\Cref{lst:mtask_parallel_example} gives an example program using the parallel task combinator.
This program will read two pins at the same time, returning when one of the pins becomes \arduinoinline{HIGH}.
If the combinator was the \cleaninline{.&&.} instead, the type would be \cleaninline{MTask v (Bool, Bool)} and the task would only return when both pins have been \arduinoinline{HIGH} but not necessarily at the same time.

\begin{lstClean}[label={lst:mtask_parallel_example},caption={Parallel task combinator example in \gls{MTASK}.}]
task :: MTask v Bool
task =
        declarePin D0 PMInput \d0->
        declarePin D1 PMInput \d1->
        let monitor pin = readD pin >>*. [IfValue (\x->x) \x->rtrn x]
        In {main = monitor d0 .||. monitor d1}
\end{lstClean}

\subsubsection{Repeat}\label{sec:repeat}
The \cleaninline{rpeat} combinator executes the child task.
If a stable value is observed, the task is reinstated.
The functionality of \cleaninline{rpeat} can also be simulated by using functions and sequential task combinators and even made to be stateful as can be seen in \cref{lst:blinkthreadmtask}.

\begin{lstClean}[label={lst:mtask_repeat},caption={Repeat task combinators in \gls{MTASK}.}]
class rpeat v where
        rpeat :: (MTask v a) -> MTask v a
\end{lstClean}

To demonstrate the combinator, \cref{lst:mtask_repeat_example} show \cleaninline{rpeat} in use.
This task will mirror the value read from analog \gls{GPIO} pin \cleaninline{A1} to pin \cleaninline{A2} by constantly reading the pin and writing the result.

\begin{lstClean}[label={lst:mtask_repeat_example},caption={Exemplary repeat task in \gls{MTASK}.}]
task :: MTask v Int | mtask v
task =
        declarePin A1 PMInput \a1->
        declarePin A2 PMOutput \a2->
        {main = rpeat (readA a1 >>~. writeA a2 >>|. delay (lit 1000))}
\end{lstClean}

\subsection{\texorpdfstring{\Glsxtrlongpl{SDS}}{Shared data sources}}
\Glspl{SDS} in \gls{MTASK} are by default references to shared memory but can also be references to \glspl{SDS} in \gls{ITASK} (see \cref{sec:liftsds}).
Similar to peripherals (see \cref{sssec:peripherals}), they are constructed at the top level and are accessed through interaction tasks.
The \cleaninline{getSds} task yields the current value of the \gls{SDS} as an unstable value.
This behaviour is similar to the \cleaninline{watch} task in \gls{ITASK}.
Writing a new value to \pgls{SDS} is done using \cleaninline{setSds}.
This task yields the written value as a stable result after it is done writing.
Getting and immediately after setting \pgls{SDS} is not necessarily an \emph{atomic} operation in \gls{MTASK} because it is possible that another task accesses the \gls{SDS} in between.
To circumvent this issue, \cleaninline{updSds} is created, this task atomically updates the value of the \gls{SDS}.
The \cleaninline{updSds} task only guarantees atomicity within \gls{MTASK}.

\begin{lstClean}[label={lst:mtask_sds},caption={\Glspl{SDS} in \gls{MTASK}.}]
:: Sds a // abstract
class sds v where
        sds :: ((v (Sds t)) -> In t (Main (MTask v u))) -> Main (MTask v u)
        getSds :: (v (Sds t))                -> MTask v t
        setSds :: (v (Sds t))  (v t)         -> MTask v t
        updSds :: (v (Sds t)) ((v t) -> v t) -> MTask v t
\end{lstClean}

\Cref{lst:mtask_sds_examples} shows an example using \glspl{SDS}.
The \cleaninline{count} function takes a pin and returns a task that counts the number of times the pin is observed as high by incrementing the \cleaninline{share} \gls{SDS}.
In the \cleaninline{main} expression, this function is called twice and the results are combined using the parallel or combinator (\cleaninline{.\|\|.}).
Using a sequence of \cleaninline{getSds} and \cleaninline{setSds} would be unsafe here because the other branch might write their old increment value immediately after writing, effectively missing a count.\todo{beter opschrijven}

\begin{lstClean}[label={lst:mtask_sds_examples},caption={Examples with \glspl{SDS} in \gls{MTASK}.}]
task :: MTask v Int | mtask v
task = declarePin D3 PMInput \d3->
        declarePin D5 PMInput \d5->
           sds \share=0
        In fun \count=(\pin->
                    readD pin
                >>* [IfValue (\x->x) (\_->updSds (\x->x +. lit 1) share)]
                >>| delay (lit 100) // debounce
                >>| count pin)
        In {main=count d3 .||. count d5}
\end{lstClean}

\section{Conclusion}
\Gls{MTASK} is a rich \gls{TOP} language tailored for \gls{IOT} systems.
It is embedded in the pure functional language \gls{CLEAN} and uses an enriched lambda calculus as a host language.
It provides support for all common arithmetic expressions, conditionals, functions, but also several basic tasks, task combinators, peripheral support and integration with \gls{ITASK}.
By embedding domain-specific knowledge in the language itself, it achieves the same abstraction level and dynamicity as other \gls{TOP} languages while targetting tiny computers instead.
As a result, a single declarative specification can describe an entire \gls{IOT} system.

\input{subfilepostamble}
\end{document}