%6
%7
%8
%9
%10
%11
%12

The test process consists of several stages. The results of the first stage,
planning, are descibed in this document. On the basis of this document actual
test cases will be designed. Afterwards the actual tests will be implemented
and executed. The results of these tests will then be evaluated against the
exit criteria (see Section~\ref{sec:exitcriteria}) and depending on the outcome
of these evaluations further tests might be deemed necessary.

\subsection{Quality Characteristics}
The quality characteristics that are to be tested are described using the
ISO/IEC 25010 \cite{iso25010} as a guideline. In the following sections we will
discuss the relevant \textit{product quality} and \textit{quality in use}
characteristics.

\subsubsection{Product quality}
Product quality is divided into eight main categories which are divided into
several subcategories. Below we will discuss the qualities which are relevant
to the SUT.
\begin{itemize}
	\item \textbf{Functional suitability}\\
	As descibed in Section~\ref{sec:risks} the SUT is core functioanlity of the
	networking capable system. Because many other systems running on the system
	could rely on it it is very important that the SUT is functionaly suitable.
	Therefore all three subcharacteristics of Functional Suitability
	(\textit{Functional completeness, Functional correctness, Functional
	appropriateness}) are of vital importance. As was previously mentioned in
	Section~\ref{sec:risks} extra emphasis should be placed on testing
	\emph{Functional Correctness} as recovery from Failures in
	computer-to-computer systems is problematic.
\end{itemize}

\subsubsection{Quality in use}
