na een hoop ruzie met latex is er nu een checklist!

[tt2015.git] / a2 / 1cases.tex

diff --git a/a2/1cases.tex b/a2/1cases.tex
index d8825ed..b3ea384 100644 (file)
--- a/a2/1cases.tex
+++ b/a2/1cases.tex
@@ -1,18 +1,65 @@
+
+\pagebreak
+\begin{table}

 \subsection{Preflight checklist}
 
 Before actual certification is commenced we perform a manual test using a 
 checklist.
 If any of the checks fail we immediately reject the product.
 \subsection{Preflight checklist}
 
 Before actual certification is commenced we perform a manual test using a 
 checklist.
 If any of the checks fail we immediately reject the product.

-
-\begin{enumerate}
-       \item Is the product complete?
-       \item Does the product come with a manual or quick start guide?
-       \item Is it possible to get the product in a usable state?
-       \item Can we use the product to initiate a connection in a corruption
-       free environment?
-\end{enumerate}
-
-\textbf{DIT MOET VERANDERD WORDEN, HET PRODUCT ZOU AFGEKEURD WORDEN!}
+The checklist is given in the table below.
+
+\begin{tabularx}{\linewidth}{| l | X|}
+       \hline
+Check 1 & Get the SUT in a workable state. \\\hline
+Course of action & \begin{enumerate}
+       \item Import the VirtualBox image into VirtualBox.
+       \item Boot the vm.
+       \item Verify the SUT booted succesfully and the network module(s) are loaded.
+\end{enumerate} \\\hline
+Passed & \textit{Yes/No} \\\hline \hline
+Check 2 & Verify the SUT is complete. \\\hline
+Course of action & \begin{enumerate}
+       \item Use the course of action for \emph{Check 1} in order to boot the SUT.
+       \item Verify the loopback device exists using \emph{ifconfig}
+       \item Verify the \emph{echo-server} is present on the system.
+       \item Verify \emph{Scrappy} is present on the system.
+       \item Verify all scripts used for testing are present on the system.
+\end{enumerate} \\\hline
+Passed & \textit{Yes/No} \\\hline \hline
+Check 3 & Initialize the testing environment. \\\hline
+Course of action & \begin{enumerate}
+       \item Boot the SUT (see \emph{Check 1}).
+       \item Setup iptables by executing \emph{./scripts/setup/iptables.sh}
+       \item Setup ... by executing \emph{./scripts/setup/...}
+\end{enumerate} \\\hline
+Passed & \textit{Yes/No} \\\hline
+\end{tabularx}
+\end{table}
+
+\begin{table}
+\begin{tabularx}{\linewidth}{| l | X |}
+\hline
+Check 4 & Test the tool environment. \\\hline
+Course of action & \begin{enumerate}
+       \item Boot and initialize the SUT (see \emph{Check 4})
+       \item Execute the \emph{./scripts/tests/case0-helloworld.sh} script.
+       \item Execute the command \emph{cat logs/case0.log}.
+       \item Verify the console displays a success message.
+\end{enumerate} \\\hline
+Passed & \textit{Yes/No} \\\hline \hline
+Check 5 & All test inputs and scripts are present. \\\hline
+Course of action & \begin{enumerate}
+       \item Boot the SUT (see \emph{Check 1})
+       \item Execute the command \emph{ls scripts/tests}
+       \item Verify that there is a file named case$X$ for each test case $X$
+       \item Use \emph{ls packets}
+       \item Verify that there is a file named \emph{single.pcap} and \emph{multi.pcap}.
+\end{enumerate} \\\hline
+Passed & \textit{Yes/No} \\\hline
+\end{tabularx}
+\end{table}
+
+\newpage

 
 \subsection{Testing of SUT}
 
 
 \subsection{Testing of SUT}
 


@@ -55,17 +102,32 @@ these partitions are given.
        \item Packets received in or out of order, or missing packets
 \end{enumerate}
 
        \item Packets received in or out of order, or missing packets
 \end{enumerate}
 

-\textbf{hier iets over waarom deze partities relevant zijn!}
+\textbf{hier iets over waarom deze partities relevant zijn! Waarom odd en 
+even number of bits flipped bijv interessant?}
+\bigskip

 
 Partitions 2 to 6 are tested using pairwise testing to keep the number of test
 cases feasible. The pairs are then all *except some where it does not make sense
 to do so) tested with the different request sizes of partition 1.
 
 
 Partitions 2 to 6 are tested using pairwise testing to keep the number of test
 cases feasible. The pairs are then all *except some where it does not make sense
 to do so) tested with the different request sizes of partition 1.
 

-This is expressed in the table below.
-
-\vspace{3mm}
-\textbf{Hier daadwerkelijke decision tabel}
-\vspace{3mm}
+This is expressed in Table~\ref{table:testpairs}.
+
+\begin{table}
+\begin{tabular} {p{2cm} | l | p{2cm} | l | p{1cm} || c | c | p{1.3cm} | p{1.3cm}}
+\textbf{Payload}       & \textbf{checksum}  & \textbf{destination port} & \textbf{order}         & \textbf{source port} & \textbf{payload 0} & \textbf{payload 1} & \textbf{payload small} & \textbf{payload big} \\  \hline \hline
+Correct               & Correct   & Correct          & In order       & Correct     & \cmark & \cmark & \cmark & \cmark \\  \hline
+Correct               & Incorrect & Incorrect        & Missing packet & Incorrect   & \xmark & \xmark & \cmark & \cmark \\  \hline
+odd\# of bits flipped  & Correct   & Incorrect        & Out of order   & Incorrect   & \xmark & \xmark & \cmark & \cmark \\  \hline
+odd\# of bits flipped  & Incorrect & Correct          & Missing packet & Correct     & \xmark & \xmark & \cmark & \cmark \\  \hline
+even\# of bits flipped & Correct   & Incorrect        & Missing packet & Correct     & \xmark & \xmark & \cmark & \cmark \\  \hline
+even\# of bits flipped & Incorrect & Correct          & Out of order   & Incorrect   & \xmark & \xmark & \cmark & \cmark \\  \hline
+odd\# of bits flipped  & Incorrect & Incorrect        & In order       & Incorrect   & \cmark & \cmark & \cmark & \cmark \\  \hline
+even\# of bits flipped & Incorrect & Incorrect        & In order       & Incorrect   & \cmark & \cmark & \cmark & \cmark \\  \hline
+Correct               & Incorrect & Incorrect        & Out of order   & Correct     & \xmark & \xmark & \cmark & \cmark \\  
+\end{tabular}
+\caption{Combinations of test cases}
+\label{table:testpairs}
+\end{table}

 
 \subsection{Quality, completeness and coverage of tests}
 
 
 \subsection{Quality, completeness and coverage of tests}
 


@@ -95,6 +157,55 @@ to ensure a test suite.
 
 To further decrease the number of tests needed test cases are divided into
 equivalence partitions and the combination of cases as described in 
 
 To further decrease the number of tests needed test cases are divided into
 equivalence partitions and the combination of cases as described in 

-Table~(\textbf{referentie naar decision table}) ensures that all partitions are
+Table~\ref{table:testpairs} ensures that all partitions are

 covered and the number of individual tests is still feasible. 
 
 covered and the number of individual tests is still feasible. 
 

+
+%
+% wat ik ook probeer ik krijg de eerste collum
+% zijn tekst niet verticaal gecentered
+%
+\begin{table}
+
+
+\subsection{Test cases}
+
+\begin{tabularx}{\linewidth}{| l | X|}
+\hline
+Nr & 1 \\\hline
+Title & Single valid request. \\\hline
+Input & Pcap file with prerecorded valid packets. \\\hline
+Expected output & Pcap file with valid response to request. \\\hline
+Course of action & \begin{enumerate}
+       \item Execute \emph{./scripts/tests/case1-single-valid.sh}
+       \item Load \emph{output/case1.pcap} with ...
+\end{enumerate} \\\hline
+Valid trace & \begin{enumerate}
+       \item \textbf{Hier packets benoemen?}
+\end{enumerate} \\\hline
+\end{tabularx}
+
+\begin{tabularx}{\linewidth}{| l | X|}
+       \hline
+       Nr & 2 \\\hline
+       Title & Single request with corrupted checksum. \\\hline
+       Input & Pcap file used as \emph{test-case 1} input. \\\hline
+       Expected output & No response from SUT, logs with rejected packets. \\\hline
+       Course of action & \begin{enumerate}
+               \item Load input pcap file into ....
+               \item Corrupt checksum of loaded packets.
+               \item Save resulting packets as pcap file.
+               \item Load new pcap file into ...
+               \item Replay new pcap file.
+               \item Record SUT response using...
+               \item Extract log with rejected packets.
+               \item Save recorded packets as a pcap file.
+               \item Analyze packets in resulting file.
+       \end{enumerate} \\\hline
+       Valid trace & \begin{enumerate}
+               \item \textbf{Aangeven welke packets corrupted zijn?}
+       \end{enumerate} \\\hline
+\end{tabularx}
+\end{table}
+
+\newpage