Add results table

[tt2015.git] / a2 / 1cases.tex

diff --git a/a2/1cases.tex b/a2/1cases.tex
index 69f8168..d84752a 100644 (file)
--- a/a2/1cases.tex
+++ b/a2/1cases.tex
@@ -95,8 +95,8 @@ these partitions are given.
                \begin{enumerate}
                        \item 0 payload segments
                        \item 1 payload segments
                \begin{enumerate}
                        \item 0 payload segments
                        \item 1 payload segments

-                       \item n=small payload segments
-                       \item n=big payload segments
+                       \item n=small payload segments (1 byte)
+                       \item n=big payload segments (65495 bytes)

                \end{enumerate}
        \item \emph{source port}
                \begin{enumerate}
                \end{enumerate}
        \item \emph{source port}
                \begin{enumerate}


@@ -119,11 +119,11 @@ these partitions are given.
                        \item Correct
                        \item Incorrect
                \end{enumerate}
                        \item Correct
                        \item Incorrect
                \end{enumerate}

-       \item \emph{Packet order}
+       \item \emph{Segment order}

                \begin{enumerate}
                        \item Correct
                        \item Out of order
                \begin{enumerate}
                        \item Correct
                        \item Out of order

-                       \item Missing packets
+                       \item Missing Segments

                \end{enumerate}
 \end{enumerate}
 
                \end{enumerate}
 \end{enumerate}
 


@@ -161,33 +161,37 @@ Partitions 2 to 6 are tested using pairwise testing to keep the number of test
 cases feasible. The pairs are then all *except some where it does not make sense
 to do so) tested with the different request sizes of partition 1.
 
 cases feasible. The pairs are then all *except some where it does not make sense
 to do so) tested with the different request sizes of partition 1.
 

-This is expressed in Table~\ref{table:testpairs}.
+This is expressed in Table~\ref{tbl:testpairs}. In this table the first five
+columns represent the different options for the partitions 2 to 6 of the above
+enumeration. The last four columns are the different number segments as
+described in the partition 1 of the above enumeration. These cells identify
+individual test cases by a number. An \xmark in the cell indicates that this
+test case can not be created as it is not possible with that number of segments
+(eg. sending segments out of order when the number of segments is 1).

 
 

-\newcounter{TCC}

 \setcounter{TCC}{1}
 \setcounter{TCC}{1}

-\newcommand{\doTCC}{\theTCC \stepcounter{TCC}}

 \begin{table}[H]
        \centering
 \begin{table}[H]
        \centering

-       \begin{tabular}{|l|l|l|l|l|l|l|l|l|l|l|}
+       \begin{tabular}{|l|l|l|l|l|l||l|l|l|l|}

                \hline
                \hline

-               & \multicolumn{10}{c|}{\textbf{Partition}}\\
+               & \multicolumn{9}{c|}{\textbf{Partition}}\\

                \hline
                \hline

-               & \# & 4 & 5 & 3 & 6 & 2 & 1a & 1b & 1c & 1d\\
+               & 4 & 5 & 3 & 6 & 2 & 1a & 1b & 1c & 1d\\

                \hline\hline
                \multirow{9}{*}{Instance} 
                \hline\hline
                \multirow{9}{*}{Instance} 

-               & 1 & a & a & a & a & a & \doTCC & \doTCC & \doTCC & \doTCC\\
-               & 2 & a & b & b & c & b & \xmark & \xmark & \doTCC & \doTCC\\
-               & 3 & c & a & b & a & b & \xmark & \xmark & \doTCC & \doTCC\\
-               & 4 & c & b & a & c & a & \xmark & \xmark & \doTCC & \doTCC\\
-               & 5 & b & a & b & c & a & \xmark & \xmark & \doTCC & \doTCC\\
-               & 6 & b & b & a & b & b & \xmark & \xmark & \doTCC & \doTCC\\
-               & 7 & c & b & b & a & b & \xmark & \doTCC & \doTCC & \doTCC\\
-               & 8 & b & b & b & a & b & \xmark & \doTCC & \doTCC & \doTCC\\
-               & 9 & a & b & b & b & a & \xmark & \xmark & \doTCC & \doTCC\\
+               & a & a & a & a & a & \doTCC & \doTCC & \doTCC & \doTCC\\
+               & a & b & b & c & b & \xmark & \xmark & \doTCC & \doTCC\\
+               & c & a & b & a & b & \xmark & \xmark & \doTCC & \doTCC\\
+               & c & b & a & c & a & \xmark & \xmark & \doTCC & \doTCC\\
+               & b & a & b & c & a & \xmark & \xmark & \doTCC & \doTCC\\
+               & b & b & a & b & b & \xmark & \xmark & \doTCC & \doTCC\\
+               & c & b & b & a & b & \xmark & \doTCC & \doTCC & \doTCC\\
+               & b & b & b & a & b & \xmark & \doTCC & \doTCC & \doTCC\\
+               & a & b & b & b & a & \xmark & \xmark & \doTCC & \doTCC\\

                \hline
                \hline

-\end{tabular}
+       \end{tabular}

 \caption{Combinations of test cases}
 \caption{Combinations of test cases}

-\label{table:testpairs}
+\label{tbl:testpairs}

 \end{table}
 
 \subsection{Quality, completeness and coverage of tests}
 \end{table}
 
 \subsection{Quality, completeness and coverage of tests}


@@ -225,7 +229,7 @@ position.
 
 To further decrease the number of tests needed test cases are divided into
 equivalence partitions and the combination of cases as described in 
 
 To further decrease the number of tests needed test cases are divided into
 equivalence partitions and the combination of cases as described in 

-Table~\ref{table:testpairs} ensures that all partitions are
+Table~\ref{tbl:testpairs} ensures that all partitions are

 covered and the number of individual tests is still feasible. 
 
 
 covered and the number of individual tests is still feasible. 
 
 


@@ -235,9 +239,136 @@ covered and the number of individual tests is still feasible.
 %
 
 
 %
 
 

-\subsection{Test cases}
+\subsection{Test suite}
+
+Before executing the test suite the test environment has to be initialized. 
+
+\begin{enumerate}
+       \item Boot the vm using VirtualBox.
+       \item Setup iptables by executing \texttt{\# code/iptables.sh}
+       \item Navigate to the working directory by running 
+               \texttt{\$ cd /home/student/tt2015}
+       \item Start the echo server by running 
+               \texttt{\# cd code/server \&\& Java Main}
+\end{enumerate}
+
+\subsubsection{Preflight checks}
+The we do the preflight checks as defined in Table~\ref{tbl:preflight}.
+
+\subsubsection{Test Cases}
+If the SUT passes the preflight checks the actual test cases can be executed.
+Table~\ref{tbl:testcases} shows the expected results of each of the test cases
+described in Table~\ref{table:testpairs}. 
+
+\setcounter{TCC}{1}
+\begin{table}[H]
+       \centering
+    \begin{tabular}{|l|p{.7\linewidth}|}
+       \hline
+       Test number & Expected results\\  
+       \hline\hline
+       \doTCC & An ACK\# of the send sequence number + 1.\\  \hline
+       \doTCC & An ACK\# of the sequence number of the last send segment + the
+               size of the payload of that segment.\\  \hline
+       \doTCC & An ACK\# of the sequence number of the last send segment + the
+               size of the payload of that segment.\\  \hline
+       \doTCC & An ACK\# of the sequence number of the last send segment + the
+               size of the payload of that segment.\\  \hline
+       \doTCC & The ACK\# for the SEQ\# of the first segments which is
+               corrupted is received for each consecutive segment send.\\  
+       $\vdots$ & \\  
+       \setcounter{TCC}{14}
+       \doTCC & The ACK\# for the SEQ\# of the first segments which is
+               corrupted is received for each consecutive segment send.\\  \hline
+       \doTCC & The segment is not attributed to the current connection
+               and therefore no ACK\# is received. \\  \hline
+       \doTCC & The ACK\# for the SEQ\# of the first segments which is
+               corrupted is received for each consecutive segment send.\\  \hline
+       \doTCC & The ACK\# for the SEQ\# of the first segments which is
+               corrupted is received for each consecutive segment send.\\  \hline
+       \doTCC & The segment is not attributed to the current connection
+               and therefore no ACK\# is received. \\  \hline
+       \doTCC & The ACK\# for the SEQ\# of the first segments which is
+               corrupted is received for each consecutive segment send.\\  \hline
+       \doTCC & The ACK\# for the SEQ\# of the first segments which is
+               corrupted is received for each consecutive segment send.\\ \hline
+       \doTCC & The ACK\# for the SEQ\# of the first segments which is
+               corrupted is received for each consecutive segment send.\\  \hline
+       \doTCC & The ACK\# for the SEQ\# of the first segments which is
+               corrupted is received for each consecutive segment send.\\ \hline
+       \hline
+    \end{tabular}
+\caption{Expected results of test cases}
+\label{table:preflightresults}
+\end{table}
+
+% Bij Ramons aanwezigheid
+% Paul Vitero (linkerkant lange gang)
+% verdieping Mercator
+
+%Before every test case use the following steps to initialize the testing environment.
+%
+%\begin{enumerate}
+       %\item Boot the vm using VirtualBox.
+       %\item Setup iptables by executing \texttt{\# code/iptables.sh}
+       %\item Navigate to the working directory by running \texttt{\$ cd /home/student/tt2015}
+       %\item Start the echo server by running \texttt{\# cd code/server \&\& java Main}
+%\end{enumerate}
+%
+%\begin{longtable}{|p{.2\linewidth}|p{.8\linewidth}|}
+       %\hline
+       %Nr & 1 \\\hline
+       %Title & Single valid request with 1byte payload. \\\hline
+       %Input & Generated packets. \\\hline
+       %Expected output & Packets echoed back by Echo-Server. \\\hline
+       %\multirow{2}{*}{Course of action}
+ %& 1. Use the steps listed above in order to start the SUT. \\
+ %& 2. Execute the script by running \texttt{\# code/client/tests/1.py} \\\hline
+       %Valid trace & Verify that the script prints 'Success'. \\\hline
+       %\hline
+%      
+       %Nr & 2 \\\hline
+       %Title & Single valid request with 65495bytes payload. \\\hline
+       %Input & Generated packets. \\\hline
+       %Expected output & Packets echoed back by Echo-Server. \\\hline
+       %\multirow{2}{*}{Course of action}
+       %& 1. Use the steps listed above in order to start the SUT. \\
+       %& 2. Execute the script by running \texttt{\# code/client/tests/2.py} \\\hline
+       %Valid trace & Verify that the script prints 'Success'. \\\hline
+       %\hline
+%      
+       %Nr & 3 \\\hline
+       %Title & 5 valid requests with 1byte payload. \\\hline
+       %Input & Generated packets. \\\hline
+       %Expected output & Packets echoed back by Echo-Server, in the same order as the client sent them. \\\hline
+       %\multirow{2}{*}{Course of action}
+       %& 1. Use the steps listed above in order to start the SUT. \\
+       %& 2. Execute the script by running \texttt{\# code/client/tests/3.py} \\\hline
+       %Valid trace & Verify that the script prints 'Success'. \\\hline
+       %\hline
+%      
+       %Nr & 4 \\\hline
+       %Title & 5 valid requests with 65495bytes payload. \\\hline
+       %Input & Generated packets with 65495bytes payload. \\\hline
+       %Expected output & Packets echoed back by Echo-Server, in the same order as the client sent them. \\\hline
+       %\multirow{2}{*}{Course of action}
+       %& 1. Use the steps listed above in order to start the SUT. \\
+       %& 2. Execute the script by running \texttt{\# code/client/tests/4.py} \\\hline
+       %Valid trace & Verify that the script prints 'Success'. \\\hline
+       %\hline
+%      
+       %Nr & 5 \\\hline
+       %Title & 5 valid requests with 1byte payload sent out of order. \\\hline
+       %Input & Generated packets with 1byte payload, two packets are swapped in position. \\\hline
+       %Expected output & All requests sent up to and including
+        %the swapped packet with the lowest sequence number, the remaining packets are dropped. \\\hline
+       %\multirow{2}{*}{Course of action}
+       %& 1. Use the steps listed above in order to start the SUT. \\
+       %& 2. Execute the script by running \texttt{\# code/client/tests/5.py} \\\hline
+       %Valid trace & Verify that the script prints 'Success'. \\\hline
+       %\hline
+%\end{longtable}

 
 

-%\begin{table}

 %\begin{tabularx}{\linewidth}{| l | X|}
 %\hline
 %Nr & 1 \\\hline
 %\begin{tabularx}{\linewidth}{| l | X|}
 %\hline
 %Nr & 1 \\\hline