\item Packets received in or out of order, or missing packets
\end{enumerate}
-\textbf{hier iets over waarom deze partities relevant zijn!}
+\textbf{hier iets over waarom deze partities relevant zijn! Waarom odd en
+even number of bits flipped bijv interessant?}
+\bigskip
Partitions 2 to 6 are tested using pairwise testing to keep the number of test
cases feasible. The pairs are then all *except some where it does not make sense
to do so) tested with the different request sizes of partition 1.
-This is expressed in the table below.
+This is expressed in Table~\ref{table:testpairs}.
-\vspace{3mm}
-\textbf{Hier daadwerkelijke decision tabel}
-\vspace{3mm}
+\begin{table}
+\begin{tabular} {p{2cm} | l | p{2cm} | l | p{1cm} || c | c | p{1.3cm} | p{1.3cm}}
+\textbf{Payload} & \textbf{checksum} & \textbf{destination port} & \textbf{order} & \textbf{source port} & \textbf{payload 0} & \textbf{payload 1} & \textbf{payload small} & \textbf{payload big} \\ \hline \hline
+Correct & Correct & Correct & In order & Correct & \cmark & \cmark & \cmark & \cmark \\ \hline
+Correct & Incorrect & Incorrect & Missing packet & Incorrect & \xmark & \xmark & \cmark & \cmark \\ \hline
+odd\# of bits flipped & Correct & Incorrect & Out of order & Incorrect & \xmark & \xmark & \cmark & \cmark \\ \hline
+odd\# of bits flipped & Incorrect & Correct & Missing packet & Correct & \xmark & \xmark & \cmark & \cmark \\ \hline
+even\# of bits flipped & Correct & Incorrect & Missing packet & Correct & \xmark & \xmark & \cmark & \cmark \\ \hline
+even\# of bits flipped & Incorrect & Correct & Out of order & Incorrect & \xmark & \xmark & \cmark & \cmark \\ \hline
+odd\# of bits flipped & Incorrect & Incorrect & In order & Incorrect & \cmark & \cmark & \cmark & \cmark \\ \hline
+even\# of bits flipped & Incorrect & Incorrect & In order & Incorrect & \cmark & \cmark & \cmark & \cmark \\ \hline
+Correct & Incorrect & Incorrect & Out of order & Correct & \xmark & \xmark & \cmark & \cmark \\
+\end{tabular}
+\caption{Combinations of test cases}
+\label{table:testpairs}
+\end{table}
\subsection{Quality, completeness and coverage of tests}
To further decrease the number of tests needed test cases are divided into
equivalence partitions and the combination of cases as described in
-Table~(\textbf{referentie naar decision table}) ensures that all partitions are
+Table~\ref{table:testpairs} ensures that all partitions are
covered and the number of individual tests is still feasible.