\item Packets received in or out of order, or missing packets
\end{enumerate}
-\textbf{hier iets over waarom deze partities relevant zijn!}
+\textbf{hier iets over waarom deze partities relevant zijn! Waarom odd en
+even number of bits flipped bijv interessant?}
+\bigskip
Partitions 2 to 6 are tested using pairwise testing to keep the number of test
cases feasible. The pairs are then all *except some where it does not make sense
to do so) tested with the different request sizes of partition 1.
-This is expressed in the table below.
-
-\vspace{3mm}
-\textbf{Hier daadwerkelijke decision tabel}
-\vspace{3mm}
+This is expressed in Table~\ref{table:testpairs}.
+
+\begin{table}
+\begin{tabular} {p{2cm} | l | p{2cm} | l | p{1cm} || c | c | p{1.3cm} | p{1.3cm}}
+\textbf{Payload} & \textbf{checksum} & \textbf{destination port} & \textbf{order} & \textbf{source port} & \textbf{payload 0} & \textbf{payload 1} & \textbf{payload small} & \textbf{payload big} \\ \hline \hline
+Correct & Correct & Correct & In order & Correct & \cmark & \cmark & \cmark & \cmark \\ \hline
+Correct & Incorrect & Incorrect & Missing packet & Incorrect & \xmark & \xmark & \cmark & \cmark \\ \hline
+odd\# of bits flipped & Correct & Incorrect & Out of order & Incorrect & \xmark & \xmark & \cmark & \cmark \\ \hline
+odd\# of bits flipped & Incorrect & Correct & Missing packet & Correct & \xmark & \xmark & \cmark & \cmark \\ \hline
+even\# of bits flipped & Correct & Incorrect & Missing packet & Correct & \xmark & \xmark & \cmark & \cmark \\ \hline
+even\# of bits flipped & Incorrect & Correct & Out of order & Incorrect & \xmark & \xmark & \cmark & \cmark \\ \hline
+odd\# of bits flipped & Incorrect & Incorrect & In order & Incorrect & \cmark & \cmark & \cmark & \cmark \\ \hline
+even\# of bits flipped & Incorrect & Incorrect & In order & Incorrect & \cmark & \cmark & \cmark & \cmark \\ \hline
+Correct & Incorrect & Incorrect & Out of order & Correct & \xmark & \xmark & \cmark & \cmark \\
+\end{tabular}
+\caption{Combinations of test cases}
+\label{table:testpairs}
+\end{table}
\subsection{Quality, completeness and coverage of tests}
To further decrease the number of tests needed test cases are divided into
equivalence partitions and the combination of cases as described in
-Table~(\textbf{referentie naar decision table}) ensures that all partitions are
+Table~\ref{table:testpairs} ensures that all partitions are
covered and the number of individual tests is still feasible.
+
+%
+% wat ik ook probeer ik krijg de eerste collum
+% zijn tekst niet verticaal gecentered
+%
+\begin{table}
+
+
+\subsection{Test cases}
+
+\begin{tabularx}{\linewidth}{| l | X|}
+\hline
+Nr & 1 \\\hline
+Title & Single valid request. \\\hline
+Input & Pcap file with prerecorded valid packets. \\\hline
+Expected output & Pcap file with valid response to request. \\\hline
+Course of action & \begin{enumerate}
+ \item Load input pcap file.
+ \item Replay pcap file using ...
+ \item Record SUT response using...
+ \item Save recorded packets as a pcap file.
+ \item Analyze packets in resulting file.
+\end{enumerate} \\\hline
+Valid trace & \begin{enumerate}
+ \item \textbf{Hier packets benoemen?}
+\end{enumerate} \\\hline
+\end{tabularx}
+
+\begin{tabularx}{\linewidth}{| l | X|}
+ \hline
+ Nr & 2 \\\hline
+ Title & Single request with corrupted checksum. \\\hline
+ Input & Pcap file used as \emph{test-case 1} input. \\\hline
+ Expected output & No response from SUT, logs with rejected packets. \\\hline
+ Course of action & \begin{enumerate}
+ \item Load input pcap file into ....
+ \item Corrupt checksum of loaded packets.
+ \item Save resulting packets as pcap file.
+ \item Load new pcap file into ...
+ \item Replay new pcap file.
+ \item Record SUT response using...
+ \item Extract log with rejected packets.
+ \item Save recorded packets as a pcap file.
+ \item Analyze packets in resulting file.
+ \end{enumerate} \\\hline
+ Valid trace & \begin{enumerate}
+ \item \textbf{Aangeven welke packets corrupted zijn?}
+ \end{enumerate} \\\hline
+\end{tabularx}
+\end{table}
+
+\newpage