\caption{Preflight checklist\label{tbl:preflight}}
\end{longtable}
-\subsection{Testing of SUT}
+\subsection{Testing of SUT} \label{sec:testingofsut}
The SUT is a series of services for other computer programs with no end-user
facing interface. Therefore the SUT will be tested solely by calling it's
services through various automated scripts. An automated test suite will be
, even when they are received
out of order and that missing segments are resend. The SUT should
exhibit the same behavior. If segments are received out of order it should
-either reassemble them when the missing packet has arrived or request them to
-be resend when the Missing segments should be re-requested (by ACK-ing
-the correct sequence number).
+either reassemble them when the missing segment has arrived or request them to
+be resend. Missing segments should be re-requested (by ACK-ing
+their sequence number).
-A single request consists of a number of packets that are sent
+A single request consists of a number of segments that are sent
to the \emph{echo-server} and back. The TCP specification states that such a
transaction requires the following messages.
When the \emph{SUT} has received the ACK containing the message it's passed
trough to the \emph{echo-server}. The \emph{echo-server} will proceed by ordering
the \emph{SUT} to respond by sending the exact same message. When this happens
-the \emph{SUT} has to construct the last packet in the transaction listed above.
+the \emph{SUT} has to construct the last segment in the transaction listed above.
\bigskip
carefully selected to cover the most interesting parts of the TCP specification
to ensure a complete but feasible test suite.
-To further increase the coverage of the test suites tests are randomized. The
-tests which test the handling of \emph{bit errors}, changes in the \emph{packet
-order} and \emph{dropped packets} randomize where they introduce an error. The
-test suite runs these tests multiple times to increase the likelihood that they
-discover a fault which is only present when an error occurs in a certain
-position.
+%To further increase the coverage of the test suites tests are randomized. The
+%tests which test the handling of \emph{bit errors}, changes in the \emph{segment
+%order} and \emph{dropped segments} randomize where they introduce an error. The
+%test suite runs these tests multiple times to increase the likelihood that they
+%discover a fault which is only present when an error occurs in a certain
+%position.
To further decrease the number of tests needed test cases are divided into
equivalence partitions and the combination of cases as described in
Nr & 6 \\\hline
Title & 5 requests with 65495byte payload with corrupted source port, destination port and checksum. The second segment is omitted in order to simulate a packet drop on the client side. \\\hline
- Input & Generated packets with 65495byte payload, second generated packet is removed. \\\hline
+ Input & Generated segments with 65495byte payload, second generated segment is removed. \\\hline
Expected output & All packets are dropped resulting in a connection time-out. \\\hline
\multirow{2}{*}{Course of action}
& 1. Use the steps listed above in order to start the SUT. \\
Nr & 11 \\\hline
Title & 5 requests with 65495byte corrupted payload that doesn't show up in checksum and corrupted destination port. The second packet is dropped. \\\hline
- Input & Generated packets with 65495byte payload, in these packets one 16bit word in the payload is increased by 1 and another 16bit word is decreased by 1. The destination port is also increase by one and the second packet is removed. \\\hline
+ Input & Generated packets with 65495byte payload, in these packets one 16bit word in the payload is increased by 1 and another 16bit word is decreased by 1. The destination port is also increase by one and the second segments is removed. \\\hline
Expected output & All packets are dropped resulting in a connection time-out. \\\hline
\multirow{2}{*}{Course of action}
& 1. Use the steps listed above in order to start the SUT. \\
Nr & 13 \\\hline
Title & Single request with 1byte corrupted payload and corrupted source port, destination port and checksum. \\\hline
- Input & Generated packet with 1byte payload, in this packet one byte in the payload, the source port and checksum are increased by one. \\\hline
+ Input & Generated segment with 1byte payload, in this segment one byte in the payload, the source port and checksum are increased by one. \\\hline
Expected output & All packets are dropped resulting in a connection time-out. \\\hline
\multirow{2}{*}{Course of action}
& 1. Use the steps listed above in order to start the SUT. \\
Nr & 14 \\\hline
Title & 5 requests with 1byte corrupted payload and corrupted source port, destination port and checksum. \\\hline
- Input & Generated packets with 1byte payload, in these packet one byte in the payload, the source port and checksum are increased by one. \\\hline
+ Input & Generated packets with 1byte payload, in these segment one byte in the payload, the source port and checksum are increased by one. \\\hline
Expected output & All packets are dropped resulting in a connection time-out. \\\hline
\multirow{2}{*}{Course of action}
& 1. Use the steps listed above in order to start the SUT. \\
repositories / tt2015.git / blobdiff