\item Device, Client
This is the actual device connected to the system. This can be a real
- device such as a microcontroller but also just a program on the same
- machine as the server.
+ device such as a microcontroller but it can also just be a program on
+ the same machine as the server.
\item Server, \gls{iTasks}-System
- The actual executable serving the \gls{iTasks} interfaces. The system
+ The actual executable serving the \gls{iTasks} application. The system
will contain \glspl{Task} taking care of the communication with the
clients.
\item System
programs.
\item Engine
- The runtime system of the client. This system handles the communication
- with the server and interprets the \glspl{Task}.
+ The runtime system of the client. This program handles the
+ communication with the server and interprets the \glspl{Task}.
\end{itemize}
\section{Devices}
This is tested in particular on the \texttt{STM32f7x} series \gls{ARM}
development board.
- \item Microcontrollers programmable by the \gls{Arduino} \gls{IDE}.\\
+ \item Microcontrollers who are programmable in the \gls{Arduino} \gls{IDE}.\\
This does not only include \gls{Arduino} compatible boards but also
other boards capable of running \gls{Arduino} code. The code
\emph{UNO} board that only boasts a meager \emph{2K} of \emph{RAM}.
\end{itemize}
-\section{Specification}
+\subsection{Interpreter}
+\todo{Structuur}
+The client contains an interpreter to execute a \gls{Task}'s bytecode.
+
+Before execution some preparatory work is done. The stack will be initialized
+and the program counter and stack pointer are set to zero and the bottom
+respectively. Then, the interpreter executes one step at the time while the
+program counter is smaller than the program length. The code for this is listed
+in Listing~\ref{lst:interpr}. One execution step is basically a big switch
+statement going over all possible bytecode instructions. Some instructions are
+detailed upon in the listing. The \CI{BCPush} instruction is a little more
+complicated in real life because some decoding will take place as not all
+\CI{BCValue}'s are of the same length.
+
+\begin{lstlisting}[language=C,label={lst:interpr},%
+ caption={Rough code outline for interpretation}]
+#define f16(p) program[pc]*265+program[pc+1]
+
+void run_task(struct task *t){
+ uint8_t *program = t->bc;
+ int plen = t->tasklength;
+ int pc = 0;
+ int sp = 0;
+ while(pc < plen){
+ switch(program[pc++]){
+ case BCNOP:
+ break;
+ case BCPUSH:
+ stack[sp++] = pc++ //Simplified
+ break;
+ case BCPOP:
+ sp--;
+ break;
+ case BCSDSSTORE:
+ sds_store(f16(pc), stack[--sp]);
+ pc+=2;
+ break;
+ // ...
+ case BCADD: trace("add");
+ stack[sp-2] = stack[sp-2] + stack[sp-1];
+ sp -= 1;
+ break;
+ // ...
+ case BCJMPT: trace("jmpt to %d", program[pc]);
+ pc = stack[--sp] ? program[pc]-1 : pc+1;
+ break;
+}
+\end{lstlisting}
+
+\subsection{Specification}
The server stores a description for every device available in a record type
which are stored in a \gls{SDS}. From the macro settings in
the interface file, a profile is created for the device that describes the
caption={Device specification for \glspl{mTask}}]
:: MTaskDeviceSpec =
{ haveLed :: Bool
- , haveAio :: Bool
- , haveDio :: Bool
+ , haveLcd :: Bool
+ , have...
, bytesMemory :: Int
, stackSize :: Int
, aPins :: Int
}
\end{lstlisting}
-\section{Device Storage}
+\subsection{Device Storage}
All devices available in the system are stored in a big \gls{SDS} that contains
a list of \CI{MTaskDevice}s. The exact specification is defined as in
-Listing~\ref{lst:mtaskdevice} with the accompanying classes and types.
+Listing~\ref{lst:mtaskdevice} accompanied with the used classes and types.
The \CI{deviceResource} component of the record must implement the
\CI{MTaskDuplex} interface that provides a function that launches a \gls{Task}
Section~\ref{sec:compiler}) and the according \glspl{SDS}. Finally, it stores
the specification of the device that is received when connecting. All of this
is given in Listing~\ref{lst:mtaskdevice}. The definitions of the message
-format are explained in the following section.
+format are explained in the following section. Specialized shares are available
+per device. The internal mechanism for this is given in
+Chapter~\ref{chp:itasksint}.
\begin{lstlisting}[caption={Device type},label={lst:mtaskdevice}]
deviceStoreNP :: Shared [MTaskDevice]
+deviceShare :: MTaskDevice -> Shared MTaskDevice
:: Channels :== ([MTaskMSGRecv], [MTaskMSGSend], Bool)
:: BCState = ... // Compiler state, explained in later sections
synFun :: a (Shared Channels) -> Task ()
\end{lstlisting}
+\section{iTasks}
+The server part of the system is written in \gls{iTasks}. Functions for
+managing devices, \glspl{Task} and \glspl{SDS} have been created to support the
+functionality. An interactive application has been created that allows an
+interactive management console for the \gls{mTask} system. This interface
+provides functionality to list \glspl{SDS}, add \glspl{Task}, remove
+\glspl{Task}, administrate devices and view the state of the system.
+
+\subsection{Integration}
+When the system starts up the devices from the previous execution still
+residing in the \gls{SDS} must be cleaned up. It might be the case that they
+contain \glspl{Task}, \glspl{SDS} or errors that are no longer applicable in
+this run. A user or programmer can later choose to reconnect to some devices.
+
+\begin{lstlisting}[caption={Starting up the devices},%
+ label={lst:startupdevs}]
+startupDevices :: Task [MTaskDevice]
+startupDevices = upd (map reset) deviceStoreNP
+ where reset d = {d & deviceTask=Nothing, deviceTasks=[], deviceError=Nothing}
+\end{lstlisting}
+
+An image of the management interface is shown in Figure~\ref{lst:manage}.
+The system management is done by a single \gls{Task} called \CI{mTaskManager}.
+To manage the system, a couple of different functionalities are needed and
+are launched. The left sidebar of the interface shows the list of example
+\glspl{Task} that are present in the system. When clicking a \gls{Task}, a
+dialog opens in which you can select the device to send the \gls{Task} to. The
+dialog might contain user specified variables. All example \glspl{mTask} are of
+the type \CI{Task (Main (ByteCode () Stmt))} and can thus ask for user input
+first.
+
+The bottom panel shows the device information. In this panel, the devices can
+be created and modified. Moreover, this panel allows the user to reconnect with
+a device after a restart of the server application.
+
+\begin{figure}[H]
+ \centering
+ \includegraphics[width=\linewidth]{manage}
+ \caption{The device management interface}\label{lst:manage}
+\end{figure}
+
+\subsection{Shares}
+The architecture of the system needs to keep track of the \glspl{SDS} stored on
+the client. \glspl{SDS} can be stored on only one device at the same time.
+that also stores the of devices. This means that if a \gls{SDS} updates,
+everyone watching it will be notified. This would result in to a lot of
+notifications that are not ment to be for the listener. Moreover, when a client
+updates the \gls{SDS} this is processed by the connection handler and results
+in an update of the real \gls{SDS}.
+Finally, the \gls{SDS} of a client must be synchronized with the actual device.
+There are several ways of tackling this problem each with their own pros and
+cons and their own level of abstraction.
+
+\begin{itemize}
+ \item Instantiate an actual \gls{iTasks}-\gls{SDS} for every \gls{SDS} used
+ in a client.
+
+ \item Instantiate a \gls{iTasks}-\gls{SDS} for every device that stores all
+ their \glspl{SDS}.
+
+ \item Use only one \gls{iTasks}-\gls{SDS} for all devices.
+\end{itemize}
+
+\begin{lstlisting}[label={lst:actualdev},%
+ caption={Real types for the device \gls{SDS}}]
+deviceStoreNP :: Shared [MTaskDevice]
+deviceStore :: RWShared (Maybe (MTaskDevice, Int)) [MTaskDevice] [MTaskDevice]
+\end{lstlisting}
+
+\subsection{Parametric Lenses}
+The type of the parametric lens is \CI{Maybe (MTaskDevice, Int)}. The \gls{SDS}
+can be responsible for the entire list of devices, from now on global.
+Moreover, the \gls{SDS} can focus on a single device, from now on local. A
+local \gls{SDS} can also specifically focus on a single \gls{SDS} on a single
+device, from now on called local-share.
+
+\paragraph{Global \glspl{SDS}: }
+Accessing the global \gls{SDS} is just a matter of focussing the
+\CI{deviceStore} with the \CI{Nothing} parameter. The signature for
+\CI{deviceStore} was given in Chapter~\ref{chp:arch}. The actual implementation
+is as in Listing~\ref{lst:global}
+
+\begin{lstlisting}[label={lst:shareimpl},%
+ caption={Base share implementation}]
+deviceStoreNP :: RWShared (Maybe (MTaskDevice, Int)) [MTaskDevice] [MTaskDevice]
+deviceStoreNP = sdsFocus Nothing deviceStore
+\end{lstlisting}
+
+
+
+
+\paragraph{Local \glspl{SDS}: }
+\paragraph{Local-share specific \glspl{SDS}: }
+
+The implementation for the share is shown in Listing~\ref{lst:shareimpl}. The
+\CI{realDeviceStore} \gls{SDS} is not exported through the header files. This
+\gls{SDS} contains the actual \gls{SDS} that writes to disk or memory.
+\CI{Int} is the identifier of the \gls{SDS}. The \gls{iTasks} way of applying
+lenses is through the \CI{sdsFocus} function and through the \CI{sdsLens}
+functions. \CI{sdsFocus} allows the programmer to fix the parameter.
+\CI{sdsLens} is basically a \CI{mapReadWrite} that has access to the parameter.
+This allows the programmer to create filters and lenses. Both of the methods
+are not good enough for the device \gls{SDS} because they do not achieve the
+writing to the actual device. Writing to a device requires being able to write
+to \glspl{SDS}. To solve this problem, a real base \gls{SDS} is created. All
+the details are visible in Listing~\ref{lst:shareimpl}.
+
\section{Communication}
The communication from the server to the client and vice versa is just a
character stream containing encoded \gls{mTask} messages. The specific encoding
is visible in Appendix~\ref{app:communication-protocol}. The type holding the
-messages in Listing~\ref{lst:avmsg}. Detailed explaination about the message
+messages in Listing~\ref{lst:avmsg}. Detailed explanation about the message
types will be given in the following subsections.
\begin{lstlisting}[label={lst:avmsg},caption={Available messages}]
incoming messages. Moreover, it sends a specification request to the device in
question to determine the details of the device and updates the record to
contain the top-level \gls{Task}-id. All the device functionality heavily
-depends on the \CI{withDevices} function that applies a function a device in
+depends on the specific \CI{deviceShare} function that applies a function a device in
the \gls{SDS} when they are equal. Device equality is defined as equality on
their channels. This allows you to give an old device record to the function
and still update the latest instance. Listing~\ref{lst:connectDevice} shows the
losing all the \glspl{SDS} and \glspl{Task} that were stored and reset itself.
Shortly after the shutdown message a new server can connect to the device
because the device is back in listening mode.
+
+\section{Lifting mTask to iTasks}
+\todo{task lifting}
+
+\section{Examples}
+\todo{example program (demo)}
repositories / msc-thesis1617.git / blobdiff