X-Git-Url: https://git.martlubbers.net/?a=blobdiff_plain;f=a2%2F1cases.tex;h=0f6269ca13d764aae2b4bb3d4aca1602698b43ed;hb=e2f8479ab99ec2d7bc8ce1dea16ebc2a0a989231;hp=d8825ed5ce81eb5b5b6157eefd39fc350c0e7c11;hpb=48364b0cd18f9740aedb204b1c1b571a5cd91e67;p=tt2015.git

diff --git a/a2/1cases.tex b/a2/1cases.tex
index d8825ed..0f6269c 100644
--- a/a2/1cases.tex
+++ b/a2/1cases.tex
@@ -55,17 +55,32 @@ these partitions are given.
 	\item Packets received in or out of order, or missing packets
 \end{enumerate}
 
-\textbf{hier iets over waarom deze partities relevant zijn!}
+\textbf{hier iets over waarom deze partities relevant zijn! Waarom odd en 
+even number of bits flipped bijv interessant?}
+\bigskip
 
 Partitions 2 to 6 are tested using pairwise testing to keep the number of test
 cases feasible. The pairs are then all *except some where it does not make sense
 to do so) tested with the different request sizes of partition 1.
 
-This is expressed in the table below.
-
-\vspace{3mm}
-\textbf{Hier daadwerkelijke decision tabel}
-\vspace{3mm}
+This is expressed in Table~\ref{table:testpairs}.
+
+\begin{table}
+\begin{tabular} {p{2cm} | l | p{2cm} | l | p{1cm} || c | c | p{1.3cm} | p{1.3cm}}
+\textbf{Payload}       & \textbf{checksum}  & \textbf{destination port} & \textbf{order}         & \textbf{source port} & \textbf{payload 0} & \textbf{payload 1} & \textbf{payload small} & \textbf{payload big} \\  \hline \hline
+Correct               & Correct   & Correct          & In order       & Correct     & \cmark & \cmark & \cmark & \cmark \\  \hline
+Correct               & Incorrect & Incorrect        & Missing packet & Incorrect   & \xmark & \xmark & \cmark & \cmark \\  \hline
+odd\# of bits flipped  & Correct   & Incorrect        & Out of order   & Incorrect   & \xmark & \xmark & \cmark & \cmark \\  \hline
+odd\# of bits flipped  & Incorrect & Correct          & Missing packet & Correct     & \xmark & \xmark & \cmark & \cmark \\  \hline
+even\# of bits flipped & Correct   & Incorrect        & Missing packet & Correct     & \xmark & \xmark & \cmark & \cmark \\  \hline
+even\# of bits flipped & Incorrect & Correct          & Out of order   & Incorrect   & \xmark & \xmark & \cmark & \cmark \\  \hline
+odd\# of bits flipped  & Incorrect & Incorrect        & In order       & Incorrect   & \cmark & \cmark & \cmark & \cmark \\  \hline
+even\# of bits flipped & Incorrect & Incorrect        & In order       & Incorrect   & \cmark & \cmark & \cmark & \cmark \\  \hline
+Correct               & Incorrect & Incorrect        & Out of order   & Correct     & \xmark & \xmark & \cmark & \cmark \\  
+\end{tabular}
+\caption{Combinations of test cases}
+\label{table:testpairs}
+\end{table}
 
 \subsection{Quality, completeness and coverage of tests}
 
@@ -95,6 +110,58 @@ to ensure a test suite.
 
 To further decrease the number of tests needed test cases are divided into
 equivalence partitions and the combination of cases as described in 
-Table~(\textbf{referentie naar decision table}) ensures that all partitions are
+Table~\ref{table:testpairs} ensures that all partitions are
 covered and the number of individual tests is still feasible. 
 
+
+%
+% wat ik ook probeer ik krijg de eerste collum
+% zijn tekst niet verticaal gecentered
+%
+\begin{table}
+
+
+\subsection{Test cases}
+
+\begin{tabularx}{\linewidth}{| l | X|}
+\hline
+Nr & 1 \\\hline
+Title & Single valid request. \\\hline
+Input & Pcap file with prerecorded valid packets. \\\hline
+Expected output & Pcap file with valid response to request. \\\hline
+Course of action & \begin{enumerate}
+	\item Load input pcap file.
+	\item Replay pcap file using ...
+	\item Record SUT response using...
+	\item Save recorded packets as a pcap file.
+	\item Analyze packets in resulting file.
+\end{enumerate} \\\hline
+Valid trace & \begin{enumerate}
+	\item \textbf{Hier packets benoemen?}
+\end{enumerate} \\\hline
+\end{tabularx}
+
+\begin{tabularx}{\linewidth}{| l | X|}
+	\hline
+	Nr & 2 \\\hline
+	Title & Single request with corrupted checksum. \\\hline
+	Input & Pcap file used as \emph{test-case 1} input. \\\hline
+	Expected output & No response from SUT, logs with rejected packets. \\\hline
+	Course of action & \begin{enumerate}
+		\item Load input pcap file into ....
+		\item Corrupt checksum of loaded packets.
+		\item Save resulting packets as pcap file.
+		\item Load new pcap file into ...
+		\item Replay new pcap file.
+		\item Record SUT response using...
+		\item Extract log with rejected packets.
+		\item Save recorded packets as a pcap file.
+		\item Analyze packets in resulting file.
+	\end{enumerate} \\\hline
+	Valid trace & \begin{enumerate}
+		\item \textbf{Aangeven welke packets corrupted zijn?}
+	\end{enumerate} \\\hline
+\end{tabularx}
+\end{table}
+
+\newpage