\subsection{Quality Characteristics}
The quality characteristics that are to be tested are described using the
-ISO/IEC 25010 \cite{iso25010} as a guideline. In the following sections we will
+ISO/IEC 25010~\cite{iso25010} as a guideline. In the following sections we will
discuss the relevant \textit{product quality} and \textit{quality in use}
characteristics.
As described in Section~\ref{sec:risks} the SUT is core functionality of
the networking capable system. Because many other systems running on the
system could rely on it it is very important that the SUT is functionality
- suitable. Therefore all three sub characteristics of Functional
+ suitable. Therefore all three sub characteristics of Functional
Suitability (\textit{Functional completeness, Functional correctness,
Functional appropriateness}) are of vital importance. As was previously
mentioned in Section~\ref{sec:risks} extra emphasis should be placed on
testing \emph{Functional Correctness} as recovery from Failures in
computer-to-computer systems is problematic.
- \item \textbf{Performance efficiency} \label{sec:perf_eff}\\
+ \item \textbf{Performance efficiency} \label{sec:perf_eff}\\
As the SUT runs as a service on a system with other programs it must have
efficient \emph{resource utilisation}. It can not contain any memory leaks
or use other resources more than necessary.
- \item \textbf{Compatibility}\\
+ \item \textbf{Compatibility}\\
\emph{Interoperability} is the key feature of the SUT as it's purpose is to
communicate with other systems implementing the TCP protocol. Therefore it
is of vital importance that the SUT implements the TCP protocol correctly.
other programs on the system it runs on, since it is used as a service by
those programs. This means that the SUT has to handle preemption as well as
having multiple programs requesting it's services at once.
- \item \textbf{Reliability}\\
+ \item \textbf{Reliability}\\
As stated before, the SUT is used as a core service, this means it has to
be very \emph{mature}. It needs to behave as expected under normal working
conditions. As it can continually be requested the SUT needs to have
core aspect either, as the SUT is not used directly by humans, but is a service
which is addressed when another program needs it. \emph{Portability} isn't
either as the SUT is installed on a system once and intended to work on that
-system. \emph{Security} isn't a feauture of the SUT either, systems using the
-SUT can add their own security mechanisms on top of it.
+system. \emph{Security} isn't a feature of the SUT either, systems using the
+SUT can add their own security mechanisms on top of it.
\subsubsection{Quality in use}
Quality in use is dived into five subcategories. Below we will discuss the
categories which are relevant to the SUT.
\begin{itemize}
- \item \textbf{Effectiveness}\\
+ \item \textbf{Effectiveness}\\
This is the core aspect of the SUT, users (other programs) need to be able
to effectively use the SUT to send and receive data.
- \item \textbf{Efficiency}\\
+ \item \textbf{Efficiency}\\
This issue has already been covered above under
``performance efficiency''~\ref{sec:perf_eff}.
- \item \textbf{Satisfaction}\\
+ \item \textbf{Satisfaction}\\
It is important that programs using the SUT can \emph{trust} that the SUT
provides the promised services. This means that data is send and received
reliably and the SUT provides clear and unambiguous errors when this
service
can not be provided.
- \item \textbf{Context Coverage}\\
+ \item \textbf{Context Coverage}\\
The SUT needs to behave as expected in all specified contexts
(\emph{context completeness}).
\end{itemize}
the other categories) gives clear guarantees to programs using the services of
the SUT.
-\subsection{Levels and types of testing} \label{levels}
+\subsection{Levels and types of testing} \label{section:levels}
The client will deliver a product for certification. This means our team will
only conduct \emph{acceptance testing} and assume that the client who requested
-certification has conducted \emph{unit}, \emph{module} and \emph{integration testing}.
-We will only be conducting \emph{black-box testing} and the client is not required to handover any
-source-code.
+certification has conducted \emph{unit}, \emph{module} and \emph{integration
+testing}. We will only be conducting \emph{black-box testing} and the client
+is not required to handover any source-code.
-Initially we will conduct a few basic \emph{manual tests} based on
-experience acquired from previous certification requests (\emph{error guessing}). If
-the product fails these basic tests we immediately reject it and seize all further
+Initially we will conduct a few basic \emph{manual tests} based on experience
+acquired from previous certification requests (\emph{error guessing}). If the
+product fails these basic tests we immediately reject it and seize all further
activities.
-If the product is not rejected after the basic \emph{manual tests} we will proceed with the
-second stage of testing. For these follow-up tests we will use \emph{equivalence partitioning}
-to reduce the number of test cases. Every test case will result in a test report.
-If any of the test cases fail the product is rejected. In order to deliver
-usable feedback to the client we will still produce a test report.
+If the product is not rejected after the basic \emph{manual tests} we will
+proceed with the second stage of testing. For these follow-up tests we will use
+\emph{equivalence partitioning} to reduce the number of test cases. Every test
+case will result in a test report. If any of the test cases fail the product
+is rejected. In order to deliver usable feedback to the client we will still
+produce a test report.
\subsubsection{Manual tests}
-The basic tests mentioned in Section \ref{levels} are conducted using a
+The basic tests mentioned in Section~\ref{section:levels} are conducted using a
checklist. If any of the checks fail we immediately reject the product.
\begin{enumerate}
environment?
\end{enumerate}
-These\emph{ manual tests} are performed in order to ensure that the client has delivered a usable product.
+These\emph{ manual tests} are performed in order to ensure that the client has
+delivered a usable product.
\subsubsection{Test generation}
-For the second state of testing we first use \emph{equivalence partitioning} to reduce the
-overall number of test cases as mentioned in Section \ref{levels}. At the highest level we can define the following equivalent \emph{input classes} for the SUT.
+For the second state of testing we first use \emph{equivalence partitioning} to
+reduce the overall number of test cases as mentioned in
+Section~\ref{section:levels}. At the highest level we can define the following
+equivalent \emph{input classes} for the SUT.
\begin{enumerate}
\item Valid requests:
\end{enumerate}
\end{enumerate}
-For these requests we can introduce more cases by applying \emph{equivalence partitioning}
-to the different packets that are sent during one request.
+For these requests we can introduce more cases by applying \emph{equivalence
+partitioning} to the different packets that are sent during one request.
\begin{enumerate}
\item Packets received in order.
\item Missing packets.
\end{enumerate}
-A \emph{decision table} is used in order to ensure all different equivalent classes are covered in our tests.
-Valid packets can only exist in one form, the valid form and there is
-no need to divide these into additional classes.
-For the invalid packets we will construct a test case where only one parameter is made invalid.
-For the invalid value of this parameter we use \emph{boundary value analysis} to reduce the total
-number of test cases.
-The SUT input parameters correspond to different fields in the network packets.
-The following fields and there boundary values are considered during the testing.
+A \emph{decision table} is used in order to ensure all different equivalent
+classes are covered in our tests. Valid packets can only exist in one form,
+the valid form and there is no need to divide these into additional classes.
+For the invalid packets we will construct a test case where only one parameter
+is made invalid. For the invalid value of this parameter we use \emph{boundary
+value analysis} to reduce the total number of test cases. The SUT input
+parameters correspond to different fields in the network packets. The
+following fields and there boundary values are considered during the testing.
\begin{enumerate}
\item Checksum: valid, invalid.
\subsubsection{Test environment and automatization}
\label{section:testenv}
-%%%Java\footnote{\url{http://www.java.com}} TCP driven echo server that executed
-%%%on a virtualized Ubuntu system\footnote{\url{http://www.ubuntu.com}} running on
-%%%the error behaviour custom iptables output policies have to be set
-%%%Listing~\ref{listing:iptables}. This is needed because the kernel by default
-%%%closes all connections from unknown sources and the manually created TCP
-%%%packets used in testing the implementation are from a source unknown to the
-%%%kernel.
-%%%
-%%%\begin{lstlisting}[label={listing:iptables},caption={settings iptables}]
-%%%Chain OUTPUT (policy ACCEPT)
-%%%target prot opt source destination
-%%%ACCEPT tcp -- anywhere anywhere tcp flags:PSH/PSH
-%%%DROP tcp -- anywhere anywhere tcp flags:RST/RST
-%%%\end{lstlisting}
-
All the tools we are going to use together with the SUT gives us the following
-collection of software.
+collection of software
\begin{itemize}
- \item Windows\footnote{\url{http://www.microsoft.com/en-us/windows}}, used as a host OS.
- \item Ubuntu\footnote{\url{http://www.ubuntu.com}}, used as the guest OS running the SUT.
- \item VirtualBox\footnote{\url{https://www.virtualbox.org/}}, used to run the guest OS containing the SUT.
- \item Wireshark\footnote{\url{https://www.wireshark.org/}}, used on the guest in order to capture and analyze network
- traffic.
- \item Bit-Twist\footnote{\url{http://bittwist.sourceforge.net/}}, used to prepare network packets.
+ \item Windows\footnote{\url{http://www.microsoft.com/en-us/windows}}, used
+ as a host OS.
+ \item Ubuntu\footnote{\url{http://www.ubuntu.com}}, used as the guest OS
+ running the SUT.
+ \item VirtualBox\footnote{\url{https://www.virtualbox.org/}}, used to run
+ the guest OS containing the SUT.
+ \item Wireshark\footnote{\url{https://www.wireshark.org/}}, used on the
+ guest OS in order to capture and analyze network traffic.
+ \item Bit-Twist\footnote{\url{http://bittwist.sourceforge.net/}}, used to
+ prepare network packets.
\item Java\footnote{\url{http://www.java.com}} TCP driven echo server.
\end{itemize}
+\begin{figure}[H]
+ \label{fig:sut}
+ \centering
+ \includegraphics[width=0.5\linewidth]{SUTsetup.eps}
+ \caption{Test environment}
+\end{figure}
+
+
All test will be conducted in a virtual environment. We will use VirtualBox to
-run a Linux distribution with the product installed.
-The Linux distribution in question is Ubuntu.
-All the tests are performed from within the VirtualBox environment.
-When testing network transmissions we will only analyze the packets sent/received to/from the SUT. The host system is disconnected from the Internet or any other network in
-order to prevent unnecessary traffic.
+run a Linux distribution with the product installed. The Linux distribution in
+question is Ubuntu. All the tests are performed from within the VirtualBox
+environment. When testing network transmissions we will only analyze the
+packets sent/received to/from the SUT. The host system is disconnected from the
+Internet or any other network in order to prevent unnecessary traffic.
% Dit is niet nodig omdat het via loopback gaat
% Zeker weten? de SUT ontvangt ook niet loopback packets toch?
-
-For each test case (except for the \emph{manual tests}) a file containing previously
-captured network traffic will be replayed using Wireshark and sent to the \emph{Java TCP driven echo server}. We will use Bit-Twist
-to update the prepared packets with the MAC address of the guest network
-adapter and provide them with a valid source address. This updating step is needed because the kernel would otherwise reject the packets and prevent them from reaching the SUT. The response packets sent by the \emph{Java TCP driven echo server} and passing trough the SUT will be recorded,
-analyzed and validated according to the \textit{RFC793} specification.
-The valid packets are build manually from the \textit{RFC793} specification.
-Invalid packets are generated from this valid traffic using Bit-Twist.
-The boundary values for the different parameters (fields in packets) are determined by hand. Automated scripts are used in order to generate packets with some fields replaced with these
+% Ja maar we geven de host gewoon geen interface?
+
+For each test case (except for the \emph{manual tests}) a file containing
+previously captured network traffic will be replayed using Wireshark and sent
+to the \emph{Java TCP driven echo server}. We will use Bit-Twist to update the
+prepared packets with the MAC address of the guest network adapter and provide
+them with a valid source address. This updating step is needed because the
+kernel would otherwise reject the packets and prevent them from reaching the
+SUT. The response packets sent by the \emph{Java TCP driven echo server} and
+passing trough the SUT will be recorded, analyzed and validated according to
+the \textit{RFC793} specification. The valid packets are build manually from
+the \textit{RFC793} specification. Invalid packets are generated from this
+valid traffic using Bit-Twist. The boundary values for the different
+parameters (fields in packets) are determined by hand. Automated scripts are
+used in order to generate packets with some fields replaced with these
\emph{boundary values}.
repositories / tt2015.git / commitdiff