typo

diff --git a/2approach.tex b/2approach.tex
index 0b06e1e..634edf8 100644 (file)
--- a/2approach.tex
+++ b/2approach.tex
@@ -1,4 +1,3 @@
-
 %6
 %7
 %8
@@ -9,31 +8,32 @@
 
 The test process consists of several stages. The results of the first stage,
 planning, are descibed in this document. On the basis of this document actual
-test cases will be designed. Afterwards the actual tests will be implemented and
-executed. The results of these tests will then be evaluated against the exit
-criteria (see Section~\ref{sec:exitcriteria}) and depending on the outcome of
-these evaluations further tests might be deemed necessary.
+test cases will be designed. Afterwards the actual tests will be implemented
+and executed. The results of these tests will then be evaluated against the
+exit criteria (see Section~\ref{sec:exitcriteria}) and depending on the outcome
+of these evaluations further tests might be deemed necessary.
 
 \subsection{Quality Characteristics}
 The quality characteristics that are to be tested are described using the
-ISO/IEC 25010 \cite{iso25010}. In the following sections we will discuss the
-relevant \textit{product quality} and \textit{quality in use} characteristics.
+ISO/IEC 25010 \cite{iso25010} as a guideline. In the following sections we will
+discuss the relevant \textit{product quality} and \textit{quality in use}
+characteristics.
 
 \subsubsection{Product quality}
-Product quality is divided into eight main categories which are divided into several
-subcategories. Below we will discuss the qualities which are relevant to the SUT.
+Product quality is divided into eight main categories which are divided into
+several subcategories. Below we will discuss the qualities which are relevant
+to the SUT.
 \begin{itemize}
-       \item \textbf{Functional suitability}\\  
+       \item \textbf{Functional suitability}\\
        As descibed in Section~\ref{sec:risks} the SUT is core functioanlity of the
-       networking capable system. Because many other systems running on the
-       system could rely on it it is very important that the SUT is functionaly
-       suitable. Therefore all three subcharacteristics of Functional Suitability 
+       networking capable system. Because many other systems running on the system
+       could rely on it it is very important that the SUT is functionaly suitable.
+       Therefore all three subcharacteristics of Functional Suitability
        (\textit{Functional completeness, Functional correctness, Functional
-       appropriateness}) are of vital importance. As was previously mentioned
-       in Section~\ref{sec:risks} extra emphasis should be placed on testing
-       \emph{Functional Correctness} as recovery from Failures in 
+       appropriateness}) are of vital importance. As was previously mentioned in
+       Section~\ref{sec:risks} extra emphasis should be placed on testing
+       \emph{Functional Correctness} as recovery from Failures in
        computer-to-computer systems is problematic.
-
 \end{itemize}
 
-\subsubsection{Quality in use}
\ No newline at end of file
+\subsubsection{Quality in use}