From: Mart Lubbers Date: Wed, 11 Jan 2017 19:54:32 +0000 (+0100) Subject: update X-Git-Url: https://git.martlubbers.net/?a=commitdiff_plain;h=c23eb53a452d0aea1a26ba60fe8ce9abcb77ea02;p=mTask.git update --- diff --git a/int/nucleo-f767-blinky/.gitignore b/int/nucleo-f767-blinky/.gitignore new file mode 100644 index 0000000..cde5e0f --- /dev/null +++ b/int/nucleo-f767-blinky/.gitignore @@ -0,0 +1,6 @@ +*.bin +*.list +*.map +*.out +o/* +a/* diff --git a/int/nucleo-f767-blinky/cube/nucleo-f767-blinky/Inc/cube_dma.h b/int/nucleo-f767-blinky/cube/nucleo-f767-blinky/Inc/cube_dma.h new file mode 100644 index 0000000..abccab0 --- /dev/null +++ b/int/nucleo-f767-blinky/cube/nucleo-f767-blinky/Inc/cube_dma.h @@ -0,0 +1,10 @@ +#define DMA_IRQ_USART3_TX DMA1_Stream3_IRQHandler +#ifdef DMAv2 +#define TCIF_USART3_TX ((DMA1->LISR & DMA_LISR_TCIF3)!=0) +#define CTCIF_USART3_TX (DMA1->LIFCR |= DMA_LIFCR_CTCIF3) +#endif +#ifdef DMAv1 +#define TCIF_USART3_TX ((DMA1->ISR & DMA_ISR_TCIF3)!=0) +#define CTCIF_USART3_TX (DMA1->IFCR |= DMA_IFCR_CTCIF3) +#endif + diff --git a/int/nucleo-f767-blinky/cube/nucleo-f767-blinky/Src/cube_main.c b/int/nucleo-f767-blinky/cube/nucleo-f767-blinky/Src/cube_main.c new file mode 100644 index 0000000..e231130 --- /dev/null +++ b/int/nucleo-f767-blinky/cube/nucleo-f767-blinky/Src/cube_main.c @@ -0,0 +1,207 @@ +/** + ****************************************************************************** + * File Name : main.c + * Description : Main program body + ****************************************************************************** + * + * COPYRIGHT(c) 2016 STMicroelectronics + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ +/* Includes ------------------------------------------------------------------*/ +#include "stm32f7xx_hal.h" +#include "dma.h" +#include "usart.h" +#include "gpio.h" + +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Private variables ---------------------------------------------------------*/ + +/* USER CODE BEGIN PV */ +/* Private variables ---------------------------------------------------------*/ + +/* USER CODE END PV */ + +/* Private function prototypes -----------------------------------------------*/ +void SystemClock_Config(void); +void Error_Handler(void); + +/* USER CODE BEGIN PFP */ +/* Private function prototypes -----------------------------------------------*/ + +void main1(void); +/* USER CODE END PFP */ + +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ + +__weak +int main(void) +{ + + /* USER CODE BEGIN 1 */ + + /* USER CODE END 1 */ + + /* MCU Configuration----------------------------------------------------------*/ + + /* Reset of all peripherals, Initializes the Flash interface and the Systick. */ + HAL_Init(); + + /* Configure the system clock */ + SystemClock_Config(); + + /* Initialize all configured peripherals */ + MX_GPIO_Init(); + MX_DMA_Init(); + MX_USART3_UART_Init(); + + /* USER CODE BEGIN 2 */ + + /* USER CODE END 2 */ + + /* Infinite loop */ +main1(); + /* USER CODE BEGIN WHILE */ + while (1) + { + /* USER CODE END WHILE */ + + /* USER CODE BEGIN 3 */ + + } + /* USER CODE END 3 */ + +} + +/** System Clock Configuration +*/ +void SystemClock_Config(void) +{ + + RCC_OscInitTypeDef RCC_OscInitStruct; + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_PeriphCLKInitTypeDef PeriphClkInitStruct; + + __HAL_RCC_PWR_CLK_ENABLE(); + + __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); + + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_ON; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLM = 4; + RCC_OscInitStruct.PLL.PLLN = 200; + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; + RCC_OscInitStruct.PLL.PLLQ = 2; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) + { + Error_Handler(); + } + + if (HAL_PWREx_EnableOverDrive() != HAL_OK) + { + Error_Handler(); + } + + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK + |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_6) != HAL_OK) + { + Error_Handler(); + } + + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USART3; + PeriphClkInitStruct.Usart3ClockSelection = RCC_USART3CLKSOURCE_PCLK1; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) + { + Error_Handler(); + } + + HAL_SYSTICK_Config(HAL_RCC_GetHCLKFreq()/1000); + + HAL_SYSTICK_CLKSourceConfig(SYSTICK_CLKSOURCE_HCLK); + + /* SysTick_IRQn interrupt configuration */ + HAL_NVIC_SetPriority(SysTick_IRQn, 0, 0); +} + +/* USER CODE BEGIN 4 */ + +/* USER CODE END 4 */ + +/** + * @brief This function is executed in case of error occurrence. + * @param None + * @retval None + */ +void Error_Handler(void) +{ + /* USER CODE BEGIN Error_Handler */ + /* User can add his own implementation to report the HAL error return state */ + while(1) + { + } + /* USER CODE END Error_Handler */ +} + +#ifdef USE_FULL_ASSERT + +/** + * @brief Reports the name of the source file and the source line number + * where the assert_param error has occurred. + * @param file: pointer to the source file name + * @param line: assert_param error line source number + * @retval None + */ +void assert_failed(uint8_t* file, uint32_t line) +{ + /* USER CODE BEGIN 6 */ + /* User can add his own implementation to report the file name and line number, + ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ + /* USER CODE END 6 */ + +} + +#endif + +/** + * @} + */ + +/** + * @} +*/ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/int/nucleo-f767-blinky/cube/nucleo-f767-blinky/Src/cube_stm32f7xx_it.c b/int/nucleo-f767-blinky/cube/nucleo-f767-blinky/Src/cube_stm32f7xx_it.c new file mode 100644 index 0000000..96b81cb --- /dev/null +++ b/int/nucleo-f767-blinky/cube/nucleo-f767-blinky/Src/cube_stm32f7xx_it.c @@ -0,0 +1,105 @@ +/** + ****************************************************************************** + * @file stm32f7xx_it.c + * @brief Interrupt Service Routines. + ****************************************************************************** + * + * COPYRIGHT(c) 2016 STMicroelectronics + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ +/* Includes ------------------------------------------------------------------*/ +#include "stm32f7xx_hal.h" +#include "stm32f7xx.h" +#include "stm32f7xx_it.h" + +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ + +/* External variables --------------------------------------------------------*/ +extern DMA_HandleTypeDef hdma_usart3_tx; +extern UART_HandleTypeDef huart3; + +/******************************************************************************/ +/* Cortex-M7 Processor Interruption and Exception Handlers */ +/******************************************************************************/ + +/** +* @brief This function handles System tick timer. +*/ +void SysTick_Handler(void) +{ + /* USER CODE BEGIN SysTick_IRQn 0 */ + + /* USER CODE END SysTick_IRQn 0 */ + HAL_IncTick(); + HAL_SYSTICK_IRQHandler(); + /* USER CODE BEGIN SysTick_IRQn 1 */ + + /* USER CODE END SysTick_IRQn 1 */ +} + +/******************************************************************************/ +/* STM32F7xx Peripheral Interrupt Handlers */ +/* Add here the Interrupt Handlers for the used peripherals. */ +/* For the available peripheral interrupt handler names, */ +/* please refer to the startup file (startup_stm32f7xx.s). */ +/******************************************************************************/ + +/** +* @brief This function handles DMA1 stream3 global interrupt. +*/ +__weak +void DMA1_Stream3_IRQHandler(void) +{ + /* USER CODE BEGIN DMA1_Stream3_IRQn 0 */ + + /* USER CODE END DMA1_Stream3_IRQn 0 */ + HAL_DMA_IRQHandler(&hdma_usart3_tx); + /* USER CODE BEGIN DMA1_Stream3_IRQn 1 */ + + /* USER CODE END DMA1_Stream3_IRQn 1 */ +} + +/** +* @brief This function handles USART3 global interrupt. +*/ +__weak +void USART3_IRQHandler(void) +{ + /* USER CODE BEGIN USART3_IRQn 0 */ + + /* USER CODE END USART3_IRQn 0 */ + HAL_UART_IRQHandler(&huart3); + /* USER CODE BEGIN USART3_IRQn 1 */ + + /* USER CODE END USART3_IRQn 1 */ +} + +/* USER CODE BEGIN 1 */ + +/* USER CODE END 1 */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/