From 6e14aad4dfbc43fd816f25f945f46636f7645522 Mon Sep 17 00:00:00 2001 From: Mart Lubbers Date: Tue, 11 Mar 2014 17:28:15 +0100 Subject: [PATCH] remove old --- mpd.conf | 421 ----------------------------------------------- mpdscribble.conf | 54 ------ settings.json | 70 -------- 3 files changed, 545 deletions(-) delete mode 100644 mpd.conf delete mode 100644 mpdscribble.conf delete mode 100644 settings.json diff --git a/mpd.conf b/mpd.conf deleted file mode 100644 index 9a2899a..0000000 --- a/mpd.conf +++ /dev/null @@ -1,421 +0,0 @@ -# Files and directories ####################################################### -# -# This setting controls the top directory which MPD will search to discover the -# available audio files and add them to the daemon's online database. This -# setting defaults to the XDG directory, otherwise the music directory will be -# be disabled and audio files will only be accepted over ipc socket (using -# file:// protocol) or streaming files over an accepted protocol. -# -music_directory "/mnt/data/beets" -# -# This setting sets the MPD internal playlist directory. The purpose of this -# directory is storage for playlists created by MPD. The server will use -# playlist files not created by the server but only if they are in the MPD -# format. This setting defaults to playlist saving being disabled. -# -playlist_directory "/var/lib/mpd/playlists" -# -# This setting sets the location of the MPD database. This file is used to -# load the database at server start up and store the database while the -# server is not up. This setting defaults to disabled which will allow -# MPD to accept files over ipc socket (using file:// protocol) or streaming -# files over an accepted protocol. -# -db_file "/var/lib/mpd/tag_cache" -# -# These settings are the locations for the daemon log files for the daemon. -# These logs are great for troubleshooting, depending on your log_level -# settings. -# -# The special value "syslog" makes MPD use the local syslog daemon. This -# setting defaults to logging to syslog, otherwise logging is disabled. -# -log_file "/var/log/mpd/mpd.log" -# -# This setting sets the location of the file which stores the process ID -# for use of mpd --kill and some init scripts. This setting is disabled by -# default and the pid file will not be stored. -# -pid_file "/var/run/mpd/pid" -# -# This setting sets the location of the file which contains information about -# most variables to get MPD back into the same general shape it was in before -# it was brought down. This setting is disabled by default and the server -# state will be reset on server start up. -# -state_file "/var/lib/mpd/state" -# -# The location of the sticker database. This is a database which -# manages dynamic information attached to songs. -# -sticker_file "/var/lib/mpd/sticker.sql" -# -############################################################################### - - -# General music daemon options ################################################ -# -# This setting specifies the user that MPD will run as. MPD should never run as -# root and you may use this setting to make MPD change its user ID after -# initialization. This setting is disabled by default and MPD is run as the -# current user. -# -user "mpd" -# -# This setting specifies the group that MPD will run as. If not specified -# primary group of user specified with "user" setting will be used (if set). -# This is useful if MPD needs to be a member of group such as "audio" to -# have permission to use sound card. -# -#group "nogroup" -# -# This setting sets the address for the daemon to listen on. Careful attention -# should be paid if this is assigned to anything other then the default, any. -# This setting can deny access to control of the daemon. Choose any if you want -# to have mpd listen on every address -# -# For network -bind_to_address "0.0.0.0" -# -# And for Unix Socket -#bind_to_address "/var/run/mpd/socket" -# -# This setting is the TCP port that is desired for the daemon to get assigned -# to. -# -#port "6600" -# -# This setting controls the type of information which is logged. Available -# setting arguments are "default", "secure" or "verbose". The "verbose" setting -# argument is recommended for troubleshooting, though can quickly stretch -# available resources on limited hardware storage. -# -#log_level "default" -# -# If you have a problem with your MP3s ending abruptly it is recommended that -# you set this argument to "no" to attempt to fix the problem. If this solves -# the problem, it is highly recommended to fix the MP3 files with vbrfix -# (available as vbrfix in the debian archive), at which -# point gapless MP3 playback can be enabled. -# -#gapless_mp3_playback "yes" -# -# This setting enables MPD to create playlists in a format usable by other -# music players. -# -#save_absolute_paths_in_playlists "no" -# -# This setting defines a list of tag types that will be extracted during the -# audio file discovery process. Optionally, 'comment' can be added to this -# list. -# -#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc" -# -# This setting enables automatic update of MPD's database when files in -# music_directory are changed. -# -auto_update "yes" -# -# Limit the depth of the directories being watched, 0 means only watch -# the music directory itself. There is no limit by default. -# -#auto_update_depth "3" -# -############################################################################### - - -# Symbolic link behavior ###################################################### -# -# If this setting is set to "yes", MPD will discover audio files by following -# symbolic links outside of the configured music_directory. -# -#follow_outside_symlinks "yes" -# -# If this setting is set to "yes", MPD will discover audio files by following -# symbolic links inside of the configured music_directory. -# -#follow_inside_symlinks "yes" -# -############################################################################### - - -# Zeroconf / Avahi Service Discovery ########################################## -# -# If this setting is set to "yes", service information will be published with -# Zeroconf / Avahi. -# -#zeroconf_enabled "yes" -# -# The argument to this setting will be the Zeroconf / Avahi unique name for -# this MPD server on the network. -# -#zeroconf_name "Music Player" -# -############################################################################### - - -# Permissions ################################################################# -# -# If this setting is set, MPD will require password authorization. The password -# can setting can be specified multiple times for different password profiles. -# -#password "password@read,add,control,admin" -# -# This setting specifies the permissions a user has who has not yet logged in. -# -#default_permissions "read,add,control,admin" -# -############################################################################### - - -# Input ####################################################################### -# - -input { - plugin "curl" -# proxy "proxy.isp.com:8080" -# proxy_user "user" -# proxy_password "password" -} - -# -############################################################################### - -# Audio Output ################################################################ -# -# MPD supports various audio output types, as well as playing through multiple -# audio outputs at the same time, through multiple audio_output settings -# blocks. Setting this block is optional, though the server will only attempt -# autodetection for one sound card. -# -# See for examples of -# other audio outputs. -# -# An example of an ALSA output: -# -#audio_output { -# type "alsa" -# name "My ALSA Device" -# device "hw:0,0" # optional -# format "44100:16:2" # optional -# mixer_device "default" # optional -# mixer_control "Master" # optional -# mixer_index "0" # optional -#} -# -# An example of an OSS output: -# -#audio_output { -# type "oss" -# name "My OSS Device" -# device "/dev/dsp" # optional -# format "44100:16:2" # optional -# mixer_device "/dev/mixer" # optional -# mixer_control "PCM" # optional -#} -# -# An example of a shout output (for streaming to Icecast): -# -#audio_output { -# type "shout" -# encoding "ogg" # optional -# name "My Shout Stream" -# host "localhost" -# port "8000" -# mount "/mpd.ogg" -# password "hackme" -# quality "5.0" -# bitrate "128" -# format "44100:16:1" -# protocol "icecast2" # optional -# user "source" # optional -# description "My Stream Description" # optional -# genre "jazz" # optional -# public "no" # optional -# timeout "2" # optional -#} -# -# An example of a recorder output: -# -#audio_output { -# type "recorder" -# name "My recorder" -# encoder "vorbis" # optional, vorbis or lame -# path "/var/lib/mpd/recorder/mpd.ogg" -## quality "5.0" # do not define if bitrate is defined -# bitrate "128" # do not define if quality is defined -# format "44100:16:1" -#} -# -# An example of a httpd output (built-in HTTP streaming server): -# -audio_output { - type "httpd" - name "My HTTP Stream" - encoder "flac" - port "8123" - format "44100:16:2" -} -# -# An example of a pulseaudio output (streaming to a remote pulseaudio server) -# -#audio_output { -# type "pulse" -# name "My Pulse Output" -# server "remote_server" # optional -# sink "remote_server_sink" # optional -#} -# -## Example "pipe" output: -# -#audio_output { -# type "pipe" -# name "my pipe" -# command "aplay -f cd 2>/dev/null" -## Or if you're want to use AudioCompress -# command "AudioCompress -m | aplay -f cd 2>/dev/null" -## Or to send raw PCM stream through PCM: -# command "nc example.org 8765" -# format "44100:16:2" -#} -# -## An example of a null output (for no audio output): -# -#audio_output { -# type "null" -# name "My Null Output" -#} -# -# This setting will change all decoded audio to be converted to the specified -# format before being passed to the audio outputs. By default, this setting is -# disabled. -# -#audio_output_format "44100:16:2" -# -# If MPD has been compiled with libsamplerate support, this setting specifies -# the sample rate converter to use. Possible values can be found in the -# mpd.conf man page or the libsamplerate documentation. By default, this is -# setting is disabled. -# -#samplerate_converter "Fastest Sinc Interpolator" -# -############################################################################### - - -# Volume control mixer ######################################################## -# -# These are the global volume control settings. By default, this setting will -# be detected to the available audio output device, with preference going to -# hardware mixing. Hardware and software mixers for individual audio_output -# sections cannot yet be mixed. -# -# An example for controlling an ALSA, OSS or Pulseaudio mixer; If this -# setting is used other sound applications will be affected by the volume -# being controlled by MPD. -# -#mixer_type "hardware" -# -# An example for controlling all mixers through software. This will control -# all controls, even if the mixer is not supported by the device and will not -# affect any other sound producing applications. -# -#mixer_type "software" -# -# This example will not allow MPD to touch the mixer at all and will disable -# all volume controls. -# -#mixer_type "disabled" -# -############################################################################### - - -# Normalization automatic volume adjustments ################################## -# -# This setting specifies the type of ReplayGain to use. This setting can have -# the argument "album" or "track". See for more -# details. This setting is disabled by default. -# -#replaygain "album" -# -# This setting sets the pre-amp used for files that have ReplayGain tags. By -# default this setting is disabled. -# -#replaygain_preamp "0" -# -# This setting enables on-the-fly normalization volume adjustment. This will -# result in the volume of all playing audio to be adjusted so the output has -# equal "loudness". This setting is disabled by default. -# -#volume_normalization "no" -# -############################################################################### - - -# MPD Internal Buffering ###################################################### -# -# This setting adjusts the size of internal decoded audio buffering. Changing -# this may have undesired effects. Don't change this if you don't know what you -# are doing. -# -#audio_buffer_size "2048" -# -# This setting controls the percentage of the buffer which is filled before -# beginning to play. Increasing this reduces the chance of audio file skipping, -# at the cost of increased time prior to audio playback. -# -#buffer_before_play "10%" -# -############################################################################### - - -# Resource Limitations ######################################################## -# -# These settings are various limitations to prevent MPD from using too many -# resources. Generally, these settings should be minimized to prevent security -# risks, depending on the operating resources. -# -#connection_timeout "60" -#max_connections "10" -#max_playlist_length "16384" -#max_command_list_size "2048" -#max_output_buffer_size "8192" -# -############################################################################### - - -# Character Encoding ########################################################## -# -# If file or directory names do not display correctly for your locale then you -# may need to modify this setting. After modification of this setting mpd -# --create-db must be run to change the database. -# -filesystem_charset "UTF-8" -# -# This setting controls the encoding that ID3v1 tags should be converted from. -# -id3v1_encoding "UTF-8" -# -############################################################################### -# SIDPlay decoder ############################################################# -# -# songlength_database: -# Location of your songlengths file, as distributed with the HVSC. -# The sidplay plugin checks this for matching MD5 fingerprints. -# See http://www.c64.org/HVSC/DOCUMENTS/Songlengths.faq -# -# default_songlength: -# This is the default playing time in seconds for songs not in the -# songlength database, or in case you're not using a database. -# A value of 0 means play indefinitely. -# -# filter: -# Turns the SID filter emulation on or off. -# -#decoder { -# plugin "sidplay" -# songlength_database "/media/C64Music/DOCUMENTS/Songlengths.txt" -# default_songlength "120" -# filter "true" -#} -# -############################################################################### diff --git a/mpdscribble.conf b/mpdscribble.conf deleted file mode 100644 index 319dae1..0000000 --- a/mpdscribble.conf +++ /dev/null @@ -1,54 +0,0 @@ -## mpdscribble - an audioscrobbler for the Music Player Daemon. -## http://mpd.wikia.com/wiki/Client:mpdscribble - -# HTTP proxy URL. -#proxy = http://the.proxy.server:3128 - -# The location of the pid file. mpdscribble saves its process id there. -#pidfile = /var/run/mpdscribble.pid - -# Change to this system user after daemonization. -#daemon_user = mpdscribble - -# The location of the mpdscribble log file. The special value -# "syslog" makes mpdscribble use the local syslog daemon. On most -# systems, log messages will appear in /var/log/daemon.log then. -# "-" means log to stderr (the current terminal). -log = syslog - -# How verbose mpdscribble's logging should be. Default is 1. -verbose = 1 - -# How often should mpdscribble save the journal file? [seconds] -#journal_interval = 600 - -# The host running MPD, possibly protected by a password -# ([PASSWORD@]HOSTNAME). Defaults to $MPD_HOST or localhost. -#host = localhost - -# The port that the MPD listens on and mpdscribble should try to -# connect to. Defaults to $MPD_PORT or 6600. -#port = 6600 - -[last.fm] -url = http://post.audioscrobbler.com/ -username = thedopefishh -password = PASSWORDHERE -# The file where mpdscribble should store its Last.fm journal in case -# you do not have a connection to the Last.fm server. -journal = /var/cache/mpdscribble/lastfm.journal - -#[libre.fm] -#url = http://turtle.libre.fm/ -#username = my_username -#password = my_password -#journal = /var/cache/mpdscribble/librefm.journal - -#[jamendo] -#url = http://postaudioscrobbler.jamendo.com/ -#username = my_username -#password = my_password -#journal = /var/cache/mpdscribble/jamendo.journal - -#[file] -#file = /var/log/mpdscribble/log diff --git a/settings.json b/settings.json deleted file mode 100644 index 912c833..0000000 --- a/settings.json +++ /dev/null @@ -1,70 +0,0 @@ -{ - "alt-speed-down": 50, - "alt-speed-enabled": false, - "alt-speed-time-begin": 540, - "alt-speed-time-day": 127, - "alt-speed-time-enabled": false, - "alt-speed-time-end": 1020, - "alt-speed-up": 50, - "bind-address-ipv4": "0.0.0.0", - "bind-address-ipv6": "::", - "blocklist-enabled": false, - "blocklist-url": "http://www.example.com/blocklist", - "cache-size-mb": 4, - "dht-enabled": false, - "download-dir": "/mnt/data/downloads", - "download-limit": 100, - "download-limit-enabled": 0, - "download-queue-enabled": false, - "download-queue-size": 5, - "encryption": 1, - "idle-seeding-limit": 30, - "idle-seeding-limit-enabled": false, - "incomplete-dir": "/root/Downloads", - "incomplete-dir-enabled": false, - "lpd-enabled": false, - "max-peers-global": 200, - "message-level": 2, - "peer-congestion-algorithm": "", - "peer-limit-global": 10000, - "peer-limit-per-torrent": 10, - "peer-port": 51413, - "peer-port-random-high": 65535, - "peer-port-random-low": 49152, - "peer-port-random-on-start": false, - "peer-socket-tos": "default", - "pex-enabled": false, - "port-forwarding-enabled": true, - "preallocation": 1, - "prefetch-enabled": 1, - "queue-stalled-enabled": true, - "queue-stalled-minutes": 30, - "ratio-limit": 2, - "ratio-limit-enabled": false, - "rename-partial-files": true, - "rpc-authentication-required": false, - "rpc-bind-address": "0.0.0.0", - "rpc-enabled": true, - "rpc-password": "{7574ea52a56ad4e09f8fc080ebec3f5600d21433zfDCqxrt", - "rpc-port": 9091, - "rpc-url": "/transmission/", - "rpc-username": "transmission", - "rpc-whitelist": "*.*.*.*", - "rpc-whitelist-enabled": true, - "scrape-paused-torrents-enabled": true, - "script-torrent-done-enabled": false, - "script-torrent-done-filename": "", - "seed-queue-enabled": false, - "seed-queue-size": 10, - "speed-limit-down": 100, - "speed-limit-down-enabled": false, - "speed-limit-up": 500, - "speed-limit-up-enabled": true, - "start-added-torrents": true, - "trash-original-torrent-files": false, - "umask": 0, - "upload-limit": 100, - "upload-limit-enabled": 0, - "upload-slots-per-torrent": 14, - "utp-enabled": true -} -- 2.20.1